Move bundled copy of sqlite one level deeper to better separate it...

third_party/sqlite/test/insert4.test

Index: third_party/sqlite/test/insert4.test
===================================================================
--- third_party/sqlite/test/insert4.test	(revision 56608)
+++ third_party/sqlite/test/insert4.test	(working copy)
@@ -1,306 +0,0 @@
-# 2007 January 24
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-# This file implements regression tests for SQLite library.  The
-# focus of this file is testing the INSERT transfer optimization.
-#
-# $Id: insert4.test,v 1.10 2008/01/21 16:22:46 drh Exp $
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-
-ifcapable !view||!subquery {
-  finish_test
-  return
-}
-
-# The sqlite3_xferopt_count variable is incremented whenever the 
-# insert transfer optimization applies.
-#
-# This procedure runs a test to see if the sqlite3_xferopt_count is
-# set to N.
-#
-proc xferopt_test {testname N} {
-  do_test $testname {set ::sqlite3_xferopt_count} $N
-}
-
-# Create tables used for testing.
-#
-execsql {
-  PRAGMA legacy_file_format = 0;
-  CREATE TABLE t1(a int, b int, check(b>a));
-  CREATE TABLE t2(x int, y int);
-  CREATE VIEW v2 AS SELECT y, x FROM t2;
-  CREATE TABLE t3(a int, b int);
-}
-
-# Ticket #2252.  Make sure the an INSERT from identical tables
-# does not violate constraints.
-#
-do_test insert4-1.1 {
-  set sqlite3_xferopt_count 0
-  execsql {
-    DELETE FROM t1;
-    DELETE FROM t2;
-    INSERT INTO t2 VALUES(9,1);
-  }
-  catchsql {
-    INSERT INTO t1 SELECT * FROM t2;
-  }
-} {1 {constraint failed}}
-xferopt_test insert4-1.2 0
-do_test insert4-1.3 {
-  execsql {
-    SELECT * FROM t1;
-  }
-} {}
-
-# Tests to make sure that the transfer optimization is not occurring
-# when it is not a valid optimization.
-#
-# The SELECT must be against a real table.
-do_test insert4-2.1.1 {
-  execsql {
-    DELETE FROM t1;
-    INSERT INTO t1 SELECT 4, 8;
-    SELECT * FROM t1;
-  }
-} {4 8}
-xferopt_test insert4-2.1.2  0
-do_test insert4-2.2.1 {
-  catchsql {
-    DELETE FROM t1;
-    INSERT INTO t1 SELECT * FROM v2;
-    SELECT * FROM t1;
-  }
-} {0 {1 9}}
-xferopt_test insert4-2.2.2 0
-
-# Do not run the transfer optimization if there is a LIMIT clause
-#
-do_test insert4-2.3.1 {
-  execsql {
-    DELETE FROM t2;
-    INSERT INTO t2 VALUES(9,1);
-    INSERT INTO t2 SELECT y, x FROM t2;
-    INSERT INTO t3 SELECT * FROM t2 LIMIT 1;
-    SELECT * FROM t3;
-  }
-} {9 1}
-xferopt_test insert4-2.3.2  0
-do_test insert4-2.3.3 {
-  catchsql {
-    DELETE FROM t1;
-    INSERT INTO t1 SELECT * FROM t2 LIMIT 1;
-    SELECT * FROM t1;
-  }
-} {1 {constraint failed}}
-xferopt_test insert4-2.3.4 0
-
-# Do not run the transfer optimization if there is a DISTINCT
-#
-do_test insert4-2.4.1 {
-  execsql {
-    DELETE FROM t3;
-    INSERT INTO t3 SELECT DISTINCT * FROM t2;
-    SELECT * FROM t3;
-  }
-} {1 9 9 1}
-xferopt_test insert4-2.4.2 0
-do_test insert4-2.4.3 {
-  catchsql {
-    DELETE FROM t1;
-    INSERT INTO t1 SELECT DISTINCT * FROM t2;
-  }
-} {1 {constraint failed}}
-xferopt_test insert4-2.4.4 0
-
-# The following procedure constructs two tables then tries to transfer
-# data from one table to the other.  Checks are made to make sure the
-# transfer is successful and that the transfer optimization was used or
-# not, as appropriate.
-#
-#     xfer_check TESTID  XFER-USED   INIT-DATA   DEST-SCHEMA   SRC-SCHEMA 
-#
-# The TESTID argument is the symbolic name for this test.  The XFER-USED
-# argument is true if the transfer optimization should be employed and
-# false if not.  INIT-DATA is a single row of data that is to be 
-# transfered.  DEST-SCHEMA and SRC-SCHEMA are table declarations for
-# the destination and source tables.
-#
-proc xfer_check {testid xferused initdata destschema srcschema} {
-  execsql "CREATE TABLE dest($destschema)"
-  execsql "CREATE TABLE src($srcschema)"
-  execsql "INSERT INTO src VALUES([join $initdata ,])"
-  set ::sqlite3_xferopt_count 0
-  do_test $testid.1 {
-    execsql {
-      INSERT INTO dest SELECT * FROM src;
-      SELECT * FROM dest;
-    }
-  } $initdata
-  do_test $testid.2 {
-    set ::sqlite3_xferopt_count
-  } $xferused
-  execsql {
-    DROP TABLE dest;
-    DROP TABLE src;
-  }
-}
-
-
-# Do run the transfer optimization if tables have identical
-# CHECK constraints.
-#
-xfer_check insert4-3.1 1 {1 9} \
-    {a int, b int CHECK(b>a)} \
-    {x int, y int CHECK(y>x)}
-xfer_check insert4-3.2 1 {1 9} \
-    {a int, b int CHECK(b>a)} \
-    {x int CHECK(y>x), y int}
-
-# Do run the transfer optimization if the destination table lacks
-# any CHECK constraints regardless of whether or not there are CHECK
-# constraints on the source table.
-#
-xfer_check insert4-3.3 1 {1 9} \
-    {a int, b int} \
-    {x int, y int CHECK(y>x)}
-
-# Do run the transfer optimization if the destination table omits
-# NOT NULL constraints that the source table has.
-#
-xfer_check insert4-3.4 0 {1 9} \
-    {a int, b int CHECK(b>a)} \
-    {x int, y int}
-
-# Do not run the optimization if the destination has NOT NULL
-# constraints that the source table lacks.
-#
-xfer_check insert4-3.5 0 {1 9} \
-    {a int, b int NOT NULL} \
-    {x int, y int}
-xfer_check insert4-3.6 0 {1 9} \
-    {a int, b int NOT NULL} \
-    {x int NOT NULL, y int}
-xfer_check insert4-3.7 0 {1 9} \
-    {a int NOT NULL, b int NOT NULL} \
-    {x int NOT NULL, y int}
-xfer_check insert4-3.8 0 {1 9} \
-    {a int NOT NULL, b int} \
-    {x int, y int}
-
-
-# Do run the transfer optimization if the destination table and
-# source table have the same NOT NULL constraints or if the 
-# source table has extra NOT NULL constraints.
-#
-xfer_check insert4-3.9 1 {1 9} \
-    {a int, b int} \
-    {x int NOT NULL, y int}
-xfer_check insert4-3.10 1 {1 9} \
-    {a int, b int} \
-    {x int NOT NULL, y int NOT NULL}
-xfer_check insert4-3.11 1 {1 9} \
-    {a int NOT NULL, b int} \
-    {x int NOT NULL, y int NOT NULL}
-xfer_check insert4-3.12 1 {1 9} \
-    {a int, b int NOT NULL} \
-    {x int NOT NULL, y int NOT NULL}
-
-# Do not run the optimization if any corresponding table
-# columns have different affinities.
-#
-xfer_check insert4-3.20 0 {1 9} \
-    {a text, b int} \
-    {x int, b int}
-xfer_check insert4-3.21 0 {1 9} \
-    {a int, b int} \
-    {x text, b int}
-
-# "int" and "integer" are equivalent so the optimization should
-# run here.
-#
-xfer_check insert4-3.22 1 {1 9} \
-    {a int, b int} \
-    {x integer, b int}
-
-# Ticket #2291.
-#
-
-do_test insert4-4.1a {
-  execsql {CREATE TABLE t4(a, b, UNIQUE(a,b))}
-} {}
-ifcapable vacuum {
-  do_test insert4-4.1b {
-    execsql {
-      INSERT INTO t4 VALUES(NULL,0);
-      INSERT INTO t4 VALUES(NULL,1);
-      INSERT INTO t4 VALUES(NULL,1);
-      VACUUM;   
-    }
-  } {}
-}
-
-# Check some error conditions:
-#
-do_test insert4-5.1 {
-  # Table does not exist.
-  catchsql { INSERT INTO t2 SELECT * FROM nosuchtable }
-} {1 {no such table: nosuchtable}}
-do_test insert4-5.2 {
-  # Number of columns does not match.
-  catchsql { 
-    CREATE TABLE t5(a, b, c);
-    INSERT INTO t4 SELECT * FROM t5;
-  }
-} {1 {table t4 has 2 columns but 3 values were supplied}}
-
-do_test insert4-6.1 {
-  set ::sqlite3_xferopt_count 0
-  execsql {
-    CREATE INDEX t2_i2 ON t2(x, y COLLATE nocase); 
-    CREATE INDEX t2_i1 ON t2(x ASC, y DESC);
-    CREATE INDEX t3_i1 ON t3(a, b);
-    INSERT INTO t2 SELECT * FROM t3;
-  }
-  set ::sqlite3_xferopt_count
-} {0}
-do_test insert4-6.2 {
-  set ::sqlite3_xferopt_count 0
-  execsql {
-    DROP INDEX t2_i2;
-    INSERT INTO t2 SELECT * FROM t3;
-  }
-  set ::sqlite3_xferopt_count
-} {0}
-do_test insert4-6.3 {
-  set ::sqlite3_xferopt_count 0
-  execsql {
-    DROP INDEX t2_i1;
-    CREATE INDEX t2_i1 ON t2(x ASC, y ASC);
-    INSERT INTO t2 SELECT * FROM t3;
-  }
-  set ::sqlite3_xferopt_count
-} {1}
-do_test insert4-6.4 {
-  set ::sqlite3_xferopt_count 0
-  execsql {
-    DROP INDEX t2_i1;
-    CREATE INDEX t2_i1 ON t2(x ASC, y COLLATE RTRIM);
-    INSERT INTO t2 SELECT * FROM t3;
-  }
-  set ::sqlite3_xferopt_count
-} {0}
-
-
-
-
-finish_test