Move bundled copy of sqlite one level deeper to better separate it...

third_party/sqlite/test/wherelimit.test

Index: third_party/sqlite/test/wherelimit.test
===================================================================
--- third_party/sqlite/test/wherelimit.test	(revision 56608)
+++ third_party/sqlite/test/wherelimit.test	(working copy)
@@ -1,284 +0,0 @@
-# 2008 October 6
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-# This file implements regression tests for SQLite library.  The
-# focus of this file is testing the LIMIT ... OFFSET ... clause
-#  of UPDATE and DELETE statements.
-#
-# $Id: wherelimit.test,v 1.2 2008/10/10 18:25:46 shane Exp $
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-
-proc create_test_data {size} {
-  # Build some test data
-  #
-  execsql {
-    DROP TABLE IF EXISTS t1;
-    CREATE TABLE t1(x int, y int);
-    BEGIN;
-  }
-  for {set i 1} {$i<=$size} {incr i} {
-    for {set j 1} {$j<=$size} {incr j} {
-      execsql "INSERT INTO t1 VALUES([expr {$i}],[expr {$j}])"
-    }
-  }
-  execsql {
-    COMMIT;
-  }
-  return {}
-}
-
-ifcapable {update_delete_limit} {
-
-  # check syntax error support
-  do_test wherelimit-0.1 {
-    catchsql {DELETE FROM t1 ORDER BY x}
-  } {1 {ORDER BY without LIMIT on DELETE}}
-  do_test wherelimit-0.2 {
-    catchsql {DELETE FROM t1 WHERE x=1 ORDER BY x}
-  } {1 {ORDER BY without LIMIT on DELETE}}
-  do_test wherelimit-0.3 {
-    catchsql {UPDATE t1 SET y=1 WHERE x=1 ORDER BY x}
-  } {1 {ORDER BY without LIMIT on UPDATE}}
-
-  # no AS on table sources
-  do_test wherelimit-0.4 {
-    catchsql {DELETE FROM t1 AS a WHERE x=1}
-  } {1 {near "AS": syntax error}}
-  do_test wherelimit-0.5 {
-    catchsql {UPDATE t1 AS a SET y=1 WHERE x=1}
-  } {1 {near "AS": syntax error}}
-
-  # OFFSET w/o LIMIT
-  do_test wherelimit-0.6 {
-    catchsql {DELETE FROM t1 WHERE x=1 OFFSET 2}
-  } {1 {near "OFFSET": syntax error}}
-  do_test wherelimit-0.7 {
-    catchsql {UPDATE t1 SET y=1 WHERE x=1 OFFSET 2}
-  } {1 {near "OFFSET": syntax error}}
-
-
-  # check deletes w/o where clauses but with limit/offsets
-  create_test_data 5
-  do_test wherelimit-1.0 {
-    execsql {SELECT count(*) FROM t1}
-  } {25}
-  do_test wherelimit-1.1 {
-    execsql {DELETE FROM t1}
-    execsql {SELECT count(*) FROM t1}
-  } {0}
-  create_test_data 5
-  do_test wherelimit-1.2 {
-    execsql {DELETE FROM t1 LIMIT 5}
-    execsql {SELECT count(*) FROM t1}
-  } {20}
-  do_test wherelimit-1.3 {
-    # limit 5
-    execsql {DELETE FROM t1 ORDER BY x LIMIT 5}
-    execsql {SELECT count(*) FROM t1}
-  } {15}
-  do_test wherelimit-1.4 {
-    # limit 5, offset 2
-    execsql {DELETE FROM t1 ORDER BY x LIMIT 5 OFFSET 2}
-    execsql {SELECT count(*) FROM t1}
-  } {10}
-  do_test wherelimit-1.5 {
-    # limit 5, offset -2
-    execsql {DELETE FROM t1 ORDER BY x LIMIT 5 OFFSET -2}
-    execsql {SELECT count(*) FROM t1}
-  } {5}
-  do_test wherelimit-1.6 {
-    # limit -5 (no limit), offset 2
-    execsql {DELETE FROM t1 ORDER BY x LIMIT 2, -5}
-    execsql {SELECT count(*) FROM t1}
-  } {2}
-  do_test wherelimit-1.7 {
-    # limit 5, offset -2 (no offset)
-    execsql {DELETE FROM t1 ORDER BY x LIMIT -2, 5}
-    execsql {SELECT count(*) FROM t1}
-  } {0}
-  create_test_data 5
-  do_test wherelimit-1.8 {
-    # limit -5 (no limit), offset -2 (no offset)
-    execsql {DELETE FROM t1 ORDER BY x LIMIT -2, -5}
-    execsql {SELECT count(*) FROM t1}
-  } {0}
-  create_test_data 3
-  do_test wherelimit-1.9 {
-    # limit 5, offset 2
-    execsql {DELETE FROM t1 ORDER BY x LIMIT 2, 5}
-    execsql {SELECT count(*) FROM t1}
-  } {4}
-  do_test wherelimit-1.10 {
-    # limit 5, offset 5
-    execsql {DELETE FROM t1 ORDER BY x LIMIT 5 OFFSET 5}
-    execsql {SELECT count(*) FROM t1}
-  } {4}
-  do_test wherelimit-1.11 {
-    # limit 50, offset 30
-    execsql {DELETE FROM t1 ORDER BY x LIMIT 50 OFFSET 30}
-    execsql {SELECT count(*) FROM t1}
-  } {4}
-  do_test wherelimit-1.12 {
-    # limit 50, offset 30
-    execsql {DELETE FROM t1 ORDER BY x LIMIT 30, 50}
-    execsql {SELECT count(*) FROM t1}
-  } {4}
-  do_test wherelimit-1.13 {
-    execsql {DELETE FROM t1 ORDER BY x LIMIT 50 OFFSET 50}
-    execsql {SELECT count(*) FROM t1}
-  } {4}
-
-
-  create_test_data 6
-  do_test wherelimit-2.0 {
-    execsql {SELECT count(*) FROM t1}
-  } {36}
-  do_test wherelimit-2.1 {
-    execsql {DELETE FROM t1 WHERE x=1}
-    execsql {SELECT count(*) FROM t1}
-  } {30}
-  create_test_data 6
-  do_test wherelimit-2.2 {
-    execsql {DELETE FROM t1 WHERE x=1 LIMIT 5}
-    execsql {SELECT count(*) FROM t1}
-  } {31}
-  do_test wherelimit-2.3 {
-    # limit 5
-    execsql {DELETE FROM t1 WHERE x=1 ORDER BY x LIMIT 5}
-    execsql {SELECT count(*) FROM t1}
-  } {30}
-  do_test wherelimit-2.4 {
-    # limit 5, offset 2
-    execsql {DELETE FROM t1 WHERE x=2 ORDER BY x LIMIT 5 OFFSET 2}
-    execsql {SELECT count(*) FROM t1}
-  } {26}
-  do_test wherelimit-2.5 {
-    # limit 5, offset -2
-    execsql {DELETE FROM t1 WHERE x=2 ORDER BY x LIMIT 5 OFFSET -2}
-    execsql {SELECT count(*) FROM t1}
-  } {24}
-  do_test wherelimit-2.6 {
-    # limit -5 (no limit), offset 2
-    execsql {DELETE FROM t1 WHERE x=3 ORDER BY x LIMIT 2, -5}
-    execsql {SELECT count(*) FROM t1}
-  } {20}
-  do_test wherelimit-2.7 {
-    # limit 5, offset -2 (no offset)
-    execsql {DELETE FROM t1 WHERE x=3 ORDER BY x LIMIT -2, 5}
-    execsql {SELECT count(*) FROM t1}
-  } {18}
-  do_test wherelimit-2.8 {
-    # limit -5 (no limit), offset -2 (no offset)
-    execsql {DELETE FROM t1 WHERE x=4 ORDER BY x LIMIT -2, -5}
-    execsql {SELECT count(*) FROM t1}
-  } {12}
-  create_test_data 6
-  do_test wherelimit-2.9 {
-    # limit 5, offset 2
-    execsql {DELETE FROM t1 WHERE x=5 ORDER BY x LIMIT 2, 5}
-    execsql {SELECT count(*) FROM t1}
-  } {32}
-  do_test wherelimit-2.10 {
-    # limit 5, offset 5
-    execsql {DELETE FROM t1 WHERE x=6 ORDER BY x LIMIT 5 OFFSET 5}
-    execsql {SELECT count(*) FROM t1}
-  } {31}
-  do_test wherelimit-2.11 {
-    # limit 50, offset 30
-    execsql {DELETE FROM t1 WHERE x=1 ORDER BY x LIMIT 50 OFFSET 30}
-    execsql {SELECT count(*) FROM t1}
-  } {31}
-  do_test wherelimit-2.12 {
-    # limit 50, offset 30
-    execsql {DELETE FROM t1 WHERE x=2 ORDER BY x LIMIT 30, 50}
-    execsql {SELECT count(*) FROM t1}
-  } {31}
-  do_test wherelimit-2.13 {
-    execsql {DELETE FROM t1 WHERE x=3 ORDER BY x LIMIT 50 OFFSET 50}
-    execsql {SELECT count(*) FROM t1}
-  } {31}
-
-
-  create_test_data 6
-  do_test wherelimit-3.0 {
-    execsql {SELECT count(*) FROM t1}
-  } {36}
-  do_test wherelimit-3.1 {
-    execsql {UPDATE t1 SET y=1 WHERE x=1}
-    execsql {SELECT count(*) FROM t1 WHERE y=1}
-  } {11}
-  create_test_data 6
-  do_test wherelimit-3.2 {
-    execsql {UPDATE t1 SET y=1 WHERE x=1 LIMIT 5}
-    execsql {SELECT count(*) FROM t1 WHERE y=1}
-  } {10}
-  do_test wherelimit-3.3 {
-    # limit 5
-    execsql {UPDATE t1 SET y=2 WHERE x=2 ORDER BY x LIMIT 5}
-    execsql {SELECT count(*) FROM t1 WHERE y=2}
-  } {9}
-  create_test_data 6
-  do_test wherelimit-3.4 {
-    # limit 5, offset 2
-    execsql {UPDATE t1 SET y=2 WHERE x=2 ORDER BY x LIMIT 5 OFFSET 2}
-    execsql {SELECT count(*) FROM t1 WHERE y=1}
-  } {6}
-  do_test wherelimit-3.5 {
-    # limit 5, offset -2
-    execsql {UPDATE t1 SET y=2 WHERE x=2 ORDER BY x LIMIT 5 OFFSET -2}
-    execsql {SELECT count(*) FROM t1 WHERE y=1}
-  } {5}
-  do_test wherelimit-3.6 {
-    # limit -5 (no limit), offset 2
-    execsql {UPDATE t1 SET y=3 WHERE x=3 ORDER BY x LIMIT 2, -5}
-    execsql {SELECT count(*) FROM t1 WHERE y=3}
-  } {8}
-  do_test wherelimit-3.7 {
-    # limit 5, offset -2 (no offset)
-    execsql {UPDATE t1 SET y=3 WHERE x=3 ORDER BY x LIMIT -2, 5}
-    execsql {SELECT count(*) FROM t1 WHERE y=3}
-  } {10}
-
-  do_test wherelimit-3.8 {
-    # limit -5 (no limit), offset -2 (no offset)
-    execsql {UPDATE t1 SET y=4 WHERE x=4 ORDER BY x LIMIT -2, -5}
-    execsql {SELECT count(*) FROM t1 WHERE y=4}
-  } {9}
-  create_test_data 6
-  do_test wherelimit-3.9 {
-    # limit 5, offset 2
-    execsql {UPDATE t1 SET y=4 WHERE x=5 ORDER BY x LIMIT 2, 5}
-    execsql {SELECT count(*) FROM t1 WHERE y=4}
-  } {9}
-  do_test wherelimit-3.10 {
-    # limit 5, offset 5
-    execsql {UPDATE t1 SET y=4 WHERE x=6 ORDER BY x LIMIT 5 OFFSET 5}
-    execsql {SELECT count(*) FROM t1 WHERE y=1}
-  } {6}
-  do_test wherelimit-3.11 {
-    # limit 50, offset 30
-    execsql {UPDATE t1 SET y=1 WHERE x=1 ORDER BY x LIMIT 50 OFFSET 30}
-    execsql {SELECT count(*) FROM t1 WHERE y=1}
-  } {6}
-  do_test wherelimit-3.12 {
-    # limit 50, offset 30
-    execsql {UPDATE t1 SET y=1 WHERE x=2 ORDER BY x LIMIT 30, 50}
-    execsql {SELECT count(*) FROM t1 WHERE y=1}
-  } {6}
-  do_test wherelimit-3.13 {
-    execsql {UPDATE t1 SET y=1 WHERE x=3 ORDER BY x LIMIT 50 OFFSET 50}
-    execsql {SELECT count(*) FROM t1 WHERE y=1}
-  } {6}
-
-}
-
-finish_test