Move bundled copy of sqlite one level deeper to better separate it...

third_party/sqlite/test/trigger3.test

Index: third_party/sqlite/test/trigger3.test
===================================================================
--- third_party/sqlite/test/trigger3.test	(revision 56608)
+++ third_party/sqlite/test/trigger3.test	(working copy)
@@ -1,194 +0,0 @@
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-#
-# This file tests the RAISE() function.
-#
-
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-ifcapable {!trigger} {
-  finish_test
-  return
-}
-
-# The tests in this file were written before SQLite supported recursive }
-# trigger invocation, and some tests depend on that to pass. So disable
-# recursive triggers for this file.
-catchsql { pragma recursive_triggers = off } 
-
-# Test that we can cause ROLLBACK, FAIL and ABORT correctly
-#
-catchsql { CREATE TABLE tbl(a, b ,c) }
-execsql {
-    CREATE TRIGGER before_tbl_insert BEFORE INSERT ON tbl BEGIN SELECT CASE 
-	WHEN (new.a = 4) THEN RAISE(IGNORE) END;
-    END;
-
-    CREATE TRIGGER after_tbl_insert AFTER INSERT ON tbl BEGIN SELECT CASE 
-	WHEN (new.a = 1) THEN RAISE(ABORT,    'Trigger abort') 
-	WHEN (new.a = 2) THEN RAISE(FAIL,     'Trigger fail') 
-	WHEN (new.a = 3) THEN RAISE(ROLLBACK, 'Trigger rollback') END;
-    END;
-}
-# ABORT
-do_test trigger3-1.1 {
-    catchsql {
-	BEGIN;
-        INSERT INTO tbl VALUES (5, 5, 6);
-        INSERT INTO tbl VALUES (1, 5, 6);
-    }
-} {1 {Trigger abort}}
-do_test trigger3-1.2 {
-    execsql {
-	SELECT * FROM tbl;
-	ROLLBACK;
-    }
-} {5 5 6}
-do_test trigger3-1.3 {
-    execsql {SELECT * FROM tbl}
-} {}
-
-# FAIL
-do_test trigger3-2.1 {
-    catchsql {
-        BEGIN;
-        INSERT INTO tbl VALUES (5, 5, 6);
-        INSERT INTO tbl VALUES (2, 5, 6);
-    }
-} {1 {Trigger fail}}
-do_test trigger3-2.2 {
-    execsql {
-	SELECT * FROM tbl;
-	ROLLBACK;
-    }
-} {5 5 6 2 5 6}
-# ROLLBACK
-do_test trigger3-3.1 {
-    catchsql {
-	BEGIN;
-        INSERT INTO tbl VALUES (5, 5, 6);
-        INSERT INTO tbl VALUES (3, 5, 6);
-    }
-} {1 {Trigger rollback}}
-do_test trigger3-3.2 {
-    execsql {
-	SELECT * FROM tbl;
-    }
-} {}
-
-# Verify that a ROLLBACK trigger works like a FAIL trigger if
-# we are not within a transaction.  Ticket #3035.
-#
-do_test trigger3-3.3 {
-    catchsql {COMMIT}
-    catchsql {
-        INSERT INTO tbl VALUES (3, 9, 10);
-    }
-} {1 {Trigger rollback}}
-do_test trigger3-3.4 {
-    execsql {SELECT * FROM tbl}
-} {}
-
-# IGNORE
-do_test trigger3-4.1 {
-    catchsql {
-	BEGIN;
-        INSERT INTO tbl VALUES (5, 5, 6);
-        INSERT INTO tbl VALUES (4, 5, 6);
-    }
-} {0 {}}
-do_test trigger3-4.2 {
-    execsql {
-	SELECT * FROM tbl;
-	ROLLBACK;
-    }
-} {5 5 6}
-
-# Check that we can also do RAISE(IGNORE) for UPDATE and DELETE
-execsql {DROP TABLE tbl;}
-execsql {CREATE TABLE tbl (a, b, c);}
-execsql {INSERT INTO tbl VALUES(1, 2, 3);}
-execsql {INSERT INTO tbl VALUES(4, 5, 6);}
-execsql {
-    CREATE TRIGGER before_tbl_update BEFORE UPDATE ON tbl BEGIN
-	SELECT CASE WHEN (old.a = 1) THEN RAISE(IGNORE) END;
-    END;
-
-    CREATE TRIGGER before_tbl_delete BEFORE DELETE ON tbl BEGIN
-	SELECT CASE WHEN (old.a = 1) THEN RAISE(IGNORE) END;
-    END;
-}
-do_test trigger3-5.1 {
-    execsql {
-	UPDATE tbl SET c = 10;
-	SELECT * FROM tbl;
-    }
-} {1 2 3 4 5 10}
-do_test trigger3-5.2 {
-    execsql {
-	DELETE FROM tbl;
-	SELECT * FROM tbl;
-    }
-} {1 2 3}
-
-# Check that RAISE(IGNORE) works correctly for nested triggers:
-execsql {CREATE TABLE tbl2(a, b, c)}
-execsql {
-    CREATE TRIGGER after_tbl2_insert AFTER INSERT ON tbl2 BEGIN
-	UPDATE tbl SET c = 10;
-        INSERT INTO tbl2 VALUES (new.a, new.b, new.c);
-    END;
-}
-do_test trigger3-6 {
-    execsql {
-	INSERT INTO tbl2 VALUES (1, 2, 3);
-	SELECT * FROM tbl2;
-	SELECT * FROM tbl;
-    }
-} {1 2 3 1 2 3 1 2 3}
-
-# Check that things also work for view-triggers
-
-ifcapable view {
-
-execsql {CREATE VIEW tbl_view AS SELECT * FROM tbl}
-execsql {
-    CREATE TRIGGER tbl_view_insert INSTEAD OF INSERT ON tbl_view BEGIN
-	SELECT CASE WHEN (new.a = 1) THEN RAISE(ROLLBACK, 'View rollback')
-	            WHEN (new.a = 2) THEN RAISE(IGNORE) 
-	            WHEN (new.a = 3) THEN RAISE(ABORT, 'View abort') END;
-    END;
-}
-
-do_test trigger3-7.1 {
-    catchsql {
-	INSERT INTO tbl_view VALUES(1, 2, 3);
-    }
-} {1 {View rollback}}
-do_test trigger3-7.2 {
-    catchsql {
-	INSERT INTO tbl_view VALUES(2, 2, 3);
-    }
-} {0 {}}
-do_test trigger3-7.3 {
-    catchsql {
-	INSERT INTO tbl_view VALUES(3, 2, 3);
-    }
-} {1 {View abort}}
-
-} ;# ifcapable view
-
-integrity_check trigger3-8.1
-
-catchsql { DROP TABLE tbl; } 
-catchsql { DROP TABLE tbl2; } 
-catchsql { DROP VIEW tbl_view; }
-
-finish_test