Move bundled copy of sqlite one level deeper to better separate it...

third_party/sqlite/test/hook.test

Index: third_party/sqlite/test/hook.test
===================================================================
--- third_party/sqlite/test/hook.test	(revision 56608)
+++ third_party/sqlite/test/hook.test	(working copy)
@@ -1,337 +0,0 @@
-# 2004 Jan 14
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-# This file implements regression tests for TCL interface to the
-# SQLite library. 
-#
-# The focus of the tests in this file is the  following interface:
-#
-#      sqlite_commit_hook    (tests hook-1..hook-3 inclusive)
-#      sqlite_update_hook    (tests hook-4-*)
-#      sqlite_rollback_hook  (tests hook-5.*)
-#
-# $Id: hook.test,v 1.15 2009/04/07 14:14:23 danielk1977 Exp $
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-
-do_test hook-1.2 {
-  db commit_hook
-} {}
-
-
-do_test hook-3.1 {
-  set commit_cnt 0
-  proc commit_hook {} {
-    incr ::commit_cnt
-    return 0
-  }
-  db commit_hook ::commit_hook
-  db commit_hook
-} {::commit_hook}
-do_test hook-3.2 {
-  set commit_cnt
-} {0}
-do_test hook-3.3 {
-  execsql {
-    CREATE TABLE t2(a,b);
-  }
-  set commit_cnt
-} {1}
-do_test hook-3.4 {
-  execsql {
-    INSERT INTO t2 VALUES(1,2);
-    INSERT INTO t2 SELECT a+1, b+1 FROM t2;
-    INSERT INTO t2 SELECT a+2, b+2 FROM t2;
-  }
-  set commit_cnt
-} {4}
-do_test hook-3.5 {
-  set commit_cnt {}
-  proc commit_hook {} {
-    set ::commit_cnt [execsql {SELECT * FROM t2}]
-    return 0
-  }
-  execsql {
-    INSERT INTO t2 VALUES(5,6);
-  }
-  set commit_cnt
-} {1 2 2 3 3 4 4 5 5 6}
-do_test hook-3.6 {
-  set commit_cnt {}
-  proc commit_hook {} {
-    set ::commit_cnt [execsql {SELECT * FROM t2}] 
-    return 1
-  }
-  catchsql {
-    INSERT INTO t2 VALUES(6,7);
-  }
-} {1 {constraint failed}}
-do_test hook-3.7 {
-  set ::commit_cnt
-} {1 2 2 3 3 4 4 5 5 6 6 7}
-do_test hook-3.8 {
-  execsql {SELECT * FROM t2}
-} {1 2 2 3 3 4 4 5 5 6}
-
-# Test turnning off the commit hook
-#
-do_test hook-3.9 {
-  db commit_hook {}
-  set ::commit_cnt {}
-  execsql {
-    INSERT INTO t2 VALUES(7,8);
-  }
-  set ::commit_cnt
-} {}
-
-# Ticket #3564.
-#
-do_test hook-3.10 {
-  file delete -force test2.db test2.db-journal
-  sqlite3 db2 test2.db
-  proc commit_hook {} {
-    set y [db2 one {SELECT y FROM t3 WHERE y>10}]
-    return [expr {$y>10}]
-  }
-  db2 eval {CREATE TABLE t3(x,y)}
-  db2 commit_hook commit_hook
-  catchsql {INSERT INTO t3 VALUES(1,2)} db2
-  catchsql {INSERT INTO t3 VALUES(11,12)} db2
-  catchsql {INSERT INTO t3 VALUES(3,4)} db2
-  db2 eval {
-    SELECT * FROM t3 ORDER BY x;
-  }
-} {1 2 3 4}
-db2 close
-
-
-#----------------------------------------------------------------------------
-# Tests for the update-hook.
-#
-# 4.1.* - Very simple tests. Test that the update hook is invoked correctly 
-#         for INSERT, DELETE and UPDATE statements, including DELETE 
-#         statements with no WHERE clause.
-# 4.2.* - Check that the update-hook is invoked for rows modified by trigger
-#         bodies. Also that the database name is correctly reported when 
-#         an attached database is modified.
-# 4.3.* - Do some sorting, grouping, compound queries, population and 
-#         depopulation of indices, to make sure the update-hook is not 
-#         invoked incorrectly.
-#
-
-# Simple tests
-do_test hook-4.1.1 {
-  catchsql {
-    DROP TABLE t1;
-  }
-  execsql {
-    CREATE TABLE t1(a INTEGER PRIMARY KEY, b);
-    INSERT INTO t1 VALUES(1, 'one');
-    INSERT INTO t1 VALUES(2, 'two');
-    INSERT INTO t1 VALUES(3, 'three');
-  }
-  db update_hook [list lappend ::update_hook]
-} {}
-do_test hook-4.1.2 {
-  execsql {
-    INSERT INTO t1 VALUES(4, 'four');
-    DELETE FROM t1 WHERE b = 'two';
-    UPDATE t1 SET b = '' WHERE a = 1 OR a = 3;
-    DELETE FROM t1 WHERE 1; -- Avoid the truncate optimization (for now)
-  }
-  set ::update_hook
-} [list \
-    INSERT main t1 4 \
-    DELETE main t1 2 \
-    UPDATE main t1 1 \
-    UPDATE main t1 3 \
-    DELETE main t1 1 \
-    DELETE main t1 3 \
-    DELETE main t1 4 \
-]
-
-ifcapable trigger {
-  # Update hook is not invoked for changes to sqlite_master
-  #
-  do_test hook-4.1.3 {
-    set ::update_hook {}
-    execsql {
-      CREATE TRIGGER r1 AFTER INSERT ON t1 BEGIN SELECT RAISE(IGNORE); END;
-    }
-    set ::update_hook
-  } {}
-  do_test hook-4.1.4 {
-    set ::update_hook {}
-    execsql {
-      DROP TRIGGER r1;
-    }
-    set ::update_hook
-  } {}
-  
-  set ::update_hook {}
-  do_test hook-4.2.1 {
-    catchsql {
-      DROP TABLE t2;
-    }
-    execsql {
-      CREATE TABLE t2(c INTEGER PRIMARY KEY, d);
-      CREATE TRIGGER t1_trigger AFTER INSERT ON t1 BEGIN
-        INSERT INTO t2 VALUES(new.a, new.b);
-        UPDATE t2 SET d = d || ' via trigger' WHERE new.a = c;
-        DELETE FROM t2 WHERE new.a = c;
-      END;
-    }
-  } {}
-  do_test hook-4.2.2 {
-    execsql {
-      INSERT INTO t1 VALUES(1, 'one');
-      INSERT INTO t1 VALUES(2, 'two');
-    }
-    set ::update_hook
-  } [list \
-      INSERT main t1 1 \
-      INSERT main t2 1 \
-      UPDATE main t2 1 \
-      DELETE main t2 1 \
-      INSERT main t1 2 \
-      INSERT main t2 2 \
-      UPDATE main t2 2 \
-      DELETE main t2 2 \
-  ]
-} else {
-  execsql {
-    INSERT INTO t1 VALUES(1, 'one');
-    INSERT INTO t1 VALUES(2, 'two');
-  }
-}
-
-# Update-hook + ATTACH
-set ::update_hook {}
-ifcapable attach {
-  do_test hook-4.2.3 {
-    file delete -force test2.db
-    execsql {
-      ATTACH 'test2.db' AS aux;
-      CREATE TABLE aux.t3(a INTEGER PRIMARY KEY, b);
-      INSERT INTO aux.t3 SELECT * FROM t1;
-      UPDATE t3 SET b = 'two or so' WHERE a = 2;
-      DELETE FROM t3 WHERE 1; -- Avoid the truncate optimization (for now)
-    }
-    set ::update_hook
-  } [list \
-      INSERT aux t3 1 \
-      INSERT aux t3 2 \
-      UPDATE aux t3 2 \
-      DELETE aux t3 1 \
-      DELETE aux t3 2 \
-  ]
-}
-
-ifcapable trigger {
-  execsql {
-    DROP TRIGGER t1_trigger;
-  }
-}
-
-# Test that other vdbe operations involving btree structures do not 
-# incorrectly invoke the update-hook.
-set ::update_hook {}
-do_test hook-4.3.1 {
-  execsql {
-    CREATE INDEX t1_i ON t1(b);
-    INSERT INTO t1 VALUES(3, 'three');
-    UPDATE t1 SET b = '';
-    DELETE FROM t1 WHERE a > 1;
-  }
-  set ::update_hook
-} [list \
-    INSERT main t1 3 \
-    UPDATE main t1 1 \
-    UPDATE main t1 2 \
-    UPDATE main t1 3 \
-    DELETE main t1 2 \
-    DELETE main t1 3 \
-]
-set ::update_hook {}
-ifcapable compound&&attach {
-  do_test hook-4.3.2 {
-    execsql {
-      SELECT * FROM t1 UNION SELECT * FROM t3;
-      SELECT * FROM t1 UNION ALL SELECT * FROM t3;
-      SELECT * FROM t1 INTERSECT SELECT * FROM t3;
-      SELECT * FROM t1 EXCEPT SELECT * FROM t3;
-      SELECT * FROM t1 ORDER BY b;
-      SELECT * FROM t1 GROUP BY b;
-    }
-    set ::update_hook
-  } [list]
-}
-db update_hook {}
-#
-#----------------------------------------------------------------------------
-
-#----------------------------------------------------------------------------
-# Test the rollback-hook. The rollback-hook is a bit more complicated than
-# either the commit or update hooks because a rollback can happen 
-# explicitly (an sql ROLLBACK statement) or implicitly (a constraint or 
-# error condition).
-#
-# hook-5.1.* - Test explicit rollbacks.
-# hook-5.2.* - Test implicit rollbacks caused by constraint failure.
-#
-# hook-5.3.* - Test implicit rollbacks caused by IO errors.
-# hook-5.4.* - Test implicit rollbacks caused by malloc() failure.
-# hook-5.5.* - Test hot-journal rollbacks. Or should the rollback hook 
-#              not be called for these?
-#
-
-do_test hook-5.0 {
-  # Configure the rollback hook to increment global variable 
-  # $::rollback_hook each time it is invoked.
-  set ::rollback_hook 0
-  db rollback_hook [list incr ::rollback_hook]
-} {}
-
-# Test explicit rollbacks. Not much can really go wrong here.
-#
-do_test hook-5.1.1 {
-  set ::rollback_hook 0
-  execsql {
-    BEGIN;
-    ROLLBACK;
-  }
-  set ::rollback_hook
-} {1}
-
-# Test implicit rollbacks caused by constraints.
-#
-do_test hook-5.2.1 {
-  set ::rollback_hook 0
-  catchsql {
-    DROP TABLE t1;
-    CREATE TABLE t1(a PRIMARY KEY, b);
-    INSERT INTO t1 VALUES('one', 'I');
-    INSERT INTO t1 VALUES('one', 'I');
-  }
-  set ::rollback_hook
-} {1}
-do_test hook-5.2.2 {
-  # Check that the INSERT transaction above really was rolled back.
-  execsql {
-    SELECT count(*) FROM t1;
-  }
-} {1}
-
-#
-# End rollback-hook testing.
-#----------------------------------------------------------------------------
-
-finish_test