Move bundled copy of sqlite one level deeper to better separate it...

third_party/sqlite/test/crash.test

Index: third_party/sqlite/test/crash.test
===================================================================
--- third_party/sqlite/test/crash.test	(revision 56608)
+++ third_party/sqlite/test/crash.test	(working copy)
@@ -1,411 +0,0 @@
-# 2001 September 15
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-# This file implements regression tests for SQLite library.
-#
-# The focus of this file is testing the ability of the database to
-# uses its rollback journal to recover intact (no database corruption)
-# from a power failure during the middle of a COMMIT.  The OS interface
-# modules are overloaded using the modified I/O routines found in test6.c.  
-# These routines allow us to simulate the kind of file damage that 
-# occurs after a power failure.
-#
-# $Id: crash.test,v 1.27 2008/01/08 15:18:52 drh Exp $
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-
-ifcapable !crashtest {
-  finish_test
-  return
-}
-
-set repeats 100
-#set repeats 10
-
-# The following procedure computes a "signature" for table "abc".  If
-# abc changes in any way, the signature should change.  
-proc signature {} {
-  return [db eval {SELECT count(*), md5sum(a), md5sum(b), md5sum(c) FROM abc}]
-}
-proc signature2 {} {
-  return [db eval {SELECT count(*), md5sum(a), md5sum(b), md5sum(c) FROM abc2}]
-}
-
-#--------------------------------------------------------------------------
-# Simple crash test:
-#
-# crash-1.1: Create a database with a table with two rows.
-# crash-1.2: Run a 'DELETE FROM abc WHERE a = 1' that crashes during
-#            the first journal-sync.
-# crash-1.3: Ensure the database is in the same state as after crash-1.1.
-# crash-1.4: Run a 'DELETE FROM abc WHERE a = 1' that crashes during
-#            the first database-sync.
-# crash-1.5: Ensure the database is in the same state as after crash-1.1.
-# crash-1.6: Run a 'DELETE FROM abc WHERE a = 1' that crashes during
-#            the second journal-sync.
-# crash-1.7: Ensure the database is in the same state as after crash-1.1.
-#
-# Tests 1.8 through 1.11 test for crashes on the third journal sync and
-# second database sync.  Neither of these is required in such a small test
-# case, so these tests are just to verify that the test infrastructure
-# operates as expected.
-#
-do_test crash-1.1 {
-  execsql {
-    CREATE TABLE abc(a, b, c);
-    INSERT INTO abc VALUES(1, 2, 3);
-    INSERT INTO abc VALUES(4, 5, 6);
-  }
-  set ::sig [signature]
-  expr 0
-} {0}
-for {set i 0} {$i<10} {incr i} {
-  set seed [expr {int(abs(rand()*10000))}]
-  do_test crash-1.2.$i {
-    crashsql -delay 1 -file test.db-journal -seed $seed {
-      DELETE FROM abc WHERE a = 1;
-    }
-  } {1 {child process exited abnormally}}
-  do_test crash-1.3.$i {
-    signature
-  } $::sig
-}
-do_test crash-1.4 {
-  crashsql -delay 1 -file test.db {
-    DELETE FROM abc WHERE a = 1;
-  }
-} {1 {child process exited abnormally}}
-do_test crash-1.5 {
-  signature
-} $::sig
-do_test crash-1.6 {
-  crashsql -delay 2 -file test.db-journal {
-    DELETE FROM abc WHERE a = 1;
-  }
-} {1 {child process exited abnormally}}
-do_test crash-1.7 {
-  catchsql {
-    SELECT * FROM abc;
-  }
-} {0 {1 2 3 4 5 6}}
-
-do_test crash-1.8 {
-  crashsql -delay 3 -file test.db-journal {
-    DELETE FROM abc WHERE a = 1;
-  }
-} {0 {}}
-do_test crash-1.9 {
-  catchsql {
-    SELECT * FROM abc;
-  }
-} {0 {4 5 6}}
-do_test crash-1.10 {
-  crashsql -delay 2 -file test.db {
-    DELETE FROM abc WHERE a = 4;
-  }
-} {0 {}}
-do_test crash-1.11 {
-  catchsql {
-    SELECT * FROM abc;
-  }
-} {0 {}}
-
-#--------------------------------------------------------------------------
-# The following tests test recovery when both the database file and the the
-# journal file contain corrupt data. This can happen after pages are
-# written to the database file before a transaction is committed due to
-# cache-pressure.
-#
-# crash-2.1: Insert 18 pages of data into the database.
-# crash-2.2: Check the database file size looks ok.
-# crash-2.3: Delete 15 or so pages (with a 10 page page-cache), then crash.
-# crash-2.4: Ensure the database is in the same state as after crash-2.1.
-#
-# Test cases crash-2.5 and crash-2.6 check that the database is OK if the 
-# crash occurs during the main database file sync. But this isn't really
-# different from the crash-1.* cases.
-#
-do_test crash-2.1 {
-  execsql { BEGIN }
-  for {set n 0} {$n < 1000} {incr n} {
-    execsql "INSERT INTO abc VALUES($n, [expr 2*$n], [expr 3*$n])"
-  }
-  execsql { COMMIT }
-  set ::sig [signature]
-  execsql { SELECT sum(a), sum(b), sum(c) from abc }
-} {499500 999000 1498500}
-do_test crash-2.2 {
-  expr ([file size test.db] / 1024)>16
-} {1}
-do_test crash-2.3 {
-  crashsql -delay 2 -file test.db-journal {
-    DELETE FROM abc WHERE a < 800;
-  }
-} {1 {child process exited abnormally}}
-do_test crash-2.4 {
-  signature
-} $sig
-do_test crash-2.5 {
-  crashsql -delay 1 -file test.db {
-    DELETE FROM abc WHERE a<800;
-  }
-} {1 {child process exited abnormally}}
-do_test crash-2.6 {
-  signature
-} $sig
-
-#--------------------------------------------------------------------------
-# The crash-3.* test cases are essentially the same test as test case
-# crash-2.*, but with a more complicated data set. 
-#
-# The test is repeated a few times with different seeds for the random
-# number generator in the crashing executable. Because there is no way to
-# seed the random number generator directly, some SQL is added to the test
-# case to 'use up' a different quantity random numbers before the test SQL
-# is executed.
-#
-
-# Make sure the file is much bigger than the pager-cache (10 pages). This
-# ensures that cache-spills happen regularly.
-do_test crash-3.0 {
-  execsql {
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-  }
-  expr ([file size test.db] / 1024) > 450
-} {1}
-for {set i 1} {$i < $repeats} {incr i} {
-  set sig [signature]
-  do_test crash-3.$i.1 {
-     set seed [expr {int(abs(rand()*10000))}]
-     crashsql -delay [expr $i%5 + 1] -file test.db-journal -seed $seed "
-       BEGIN;
-       SELECT random() FROM abc LIMIT $i;
-       INSERT INTO abc VALUES(randstr(10,10), 0, 0);
-       DELETE FROM abc WHERE random()%10!=0;
-       COMMIT;
-     "
-  } {1 {child process exited abnormally}}
-  do_test crash-3.$i.2 {
-    signature
-  } $sig
-} 
-
-#--------------------------------------------------------------------------
-# The following test cases - crash-4.* - test the correct recovery of the
-# database when a crash occurs during a multi-file transaction.
-#
-# crash-4.1.*: Test recovery when crash occurs during sync() of the 
-#              main database journal file.
-# crash-4.2.*: Test recovery when crash occurs during sync() of an 
-#              attached database journal file.
-# crash-4.3.*: Test recovery when crash occurs during sync() of the master
-#              journal file. 
-#
-ifcapable attach {
-  do_test crash-4.0 {
-    file delete -force test2.db
-    file delete -force test2.db-journal
-    execsql {
-      ATTACH 'test2.db' AS aux;
-      PRAGMA aux.default_cache_size = 10;
-      CREATE TABLE aux.abc2 AS SELECT 2*a as a, 2*b as b, 2*c as c FROM abc;
-    }
-    expr ([file size test2.db] / 1024) > 450
-  } {1}
-  
-  set fin 0
-  for {set i 1} {$i<$repeats} {incr i} {
-    set seed [expr {int(abs(rand()*10000))}]
-    set sig [signature]
-    set sig2 [signature2]
-    do_test crash-4.1.$i.1 {
-       set c [crashsql -delay $i -file test.db-journal -seed $::seed "
-         ATTACH 'test2.db' AS aux;
-         BEGIN;
-         SELECT randstr($i,$i) FROM abc LIMIT $i;
-         INSERT INTO abc VALUES(randstr(10,10), 0, 0);
-         DELETE FROM abc WHERE random()%10!=0;
-         INSERT INTO abc2 VALUES(randstr(10,10), 0, 0);
-         DELETE FROM abc2 WHERE random()%10!=0;
-         COMMIT;
-       "]
-       if { $c == {0 {}} } {
-         set ::fin 1
-         set c {1 {child process exited abnormally}}
-       }
-       set c
-    } {1 {child process exited abnormally}}
-    if {$::fin} break
-    do_test crash-4.1.$i.2 {
-      signature
-    } $sig
-    do_test crash-4.1.$i.3 {
-      signature2
-    } $sig2
-  } 
-  set i 0
-  set fin 0
-  while {[incr i]} {
-    set seed [expr {int(abs(rand()*10000))}]
-    set sig [signature]
-    set sig2 [signature2]
-    set ::fin 0
-    do_test crash-4.2.$i.1 {
-       set c [crashsql -delay $i -file test2.db-journal -seed $::seed "
-         ATTACH 'test2.db' AS aux;
-         BEGIN;
-         SELECT randstr($i,$i) FROM abc LIMIT $i;
-         INSERT INTO abc VALUES(randstr(10,10), 0, 0);
-         DELETE FROM abc WHERE random()%10!=0;
-         INSERT INTO abc2 VALUES(randstr(10,10), 0, 0);
-         DELETE FROM abc2 WHERE random()%10!=0;
-         COMMIT;
-       "]
-       if { $c == {0 {}} } {
-         set ::fin 1
-         set c {1 {child process exited abnormally}}
-       }
-       set c
-    } {1 {child process exited abnormally}}
-    if { $::fin } break
-    do_test crash-4.2.$i.2 {
-      signature
-    } $sig
-    do_test crash-4.2.$i.3 {
-      signature2
-    } $sig2
-  } 
-  for {set i 1} {$i < 5} {incr i} {
-    set sig [signature]
-    set sig2 [signature2]
-    do_test crash-4.3.$i.1 {
-       crashsql -delay 1 -file test.db-mj* "
-         ATTACH 'test2.db' AS aux;
-         BEGIN;
-         SELECT random() FROM abc LIMIT $i;
-         INSERT INTO abc VALUES(randstr(10,10), 0, 0);
-         DELETE FROM abc WHERE random()%10!=0;
-         INSERT INTO abc2 VALUES(randstr(10,10), 0, 0);
-         DELETE FROM abc2 WHERE random()%10!=0;
-         COMMIT;
-       "
-    } {1 {child process exited abnormally}}
-    do_test crash-4.3.$i.2 {
-      signature
-    } $sig
-    do_test crash-4.3.$i.3 {
-      signature2
-    } $sig2
-  }
-}
-
-#--------------------------------------------------------------------------
-# The following test cases - crash-5.* - exposes a bug that existed in the
-# sqlite3pager_movepage() API used by auto-vacuum databases.
-# database when a crash occurs during a multi-file transaction. See comments
-# in test crash-5.3 for details.
-#
-db close
-file delete -force test.db
-sqlite3 db test.db
-do_test crash-5.1 {
-  execsql {
-    CREATE TABLE abc(a, b, c);                          -- Root page 3
-    INSERT INTO abc VALUES(randstr(1500,1500), 0, 0);   -- Overflow page 4
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-  }
-} {}
-do_test crash-5.2 {
-  expr [file size test.db] / 1024
-} [expr [string match [execsql {pragma auto_vacuum}] 1] ? 11 : 10]
-set sig [signature]
-do_test crash-5.3 {
-# The SQL below is used to expose a bug that existed in
-# sqlite3pager_movepage() during development of the auto-vacuum feature. It
-# functions as follows:
-# 
-# 1: Begin a transaction.
-# 2: Put page 4 on the free-list (was the overflow page for the row deleted).
-# 3: Write data to page 4 (it becomes the overflow page for the row inserted).
-#    The old page 4 data has been written to the journal file, but the
-#    journal file has not been sync()hronized.
-# 4: Create a table, which calls sqlite3pager_movepage() to move page 4
-#    to the end of the database (page 12) to make room for the new root-page.
-# 5: Put pressure on the pager-cache. This results in page 4 being written
-#    to the database file to make space in the cache to load a new page. The
-#    bug was that page 4 was written to the database file before the journal
-#    is sync()hronized.
-# 6: Commit. A crash occurs during the sync of the journal file.
-#
-# End result: Before the bug was fixed, data has been written to page 4 of the
-# database file and the journal file does not contain trustworthy rollback
-# data for this page.
-#
-  crashsql -delay 1 -file test.db-journal {
-    BEGIN;                                             -- 1
-    DELETE FROM abc WHERE oid = 1;                     -- 2
-    INSERT INTO abc VALUES(randstr(1500,1500), 0, 0);  -- 3
-    CREATE TABLE abc2(a, b, c);                        -- 4
-    SELECT * FROM abc;                                 -- 5
-    COMMIT;                                            -- 6
-  }
-} {1 {child process exited abnormally}}
-integrity_check crash-5.4
-do_test crash-5.5 {
-  signature
-} $sig
-
-#--------------------------------------------------------------------------
-# The following test cases - crash-6.* - test that a DROP TABLE operation
-# is correctly rolled back in the event of a crash while the database file
-# is being written. This is mainly to test that all pages are written to the
-# journal file before truncation in an auto-vacuum database.
-#
-do_test crash-6.1 {
-  crashsql -delay 1 -file test.db {
-    DROP TABLE abc;
-  }
-} {1 {child process exited abnormally}}
-do_test crash-6.2 {
-  signature
-} $sig
-
-#--------------------------------------------------------------------------
-# These test cases test the case where the master journal file name is 
-# corrupted slightly so that the corruption has to be detected by the
-# checksum.
-do_test crash-7.1 {
-  crashsql -delay 1 -file test.db {
-    ATTACH 'test2.db' AS aux;
-    BEGIN;
-    INSERT INTO abc VALUES(randstr(1500,1500), 0, 0);
-    INSERT INTO abc2 VALUES(randstr(1500,1500), 0, 0);
-    COMMIT;
-  }
-
-  # Change the checksum value for the master journal name.
-  set f [open test.db-journal a]
-  fconfigure $f -encoding binary
-  seek $f [expr [file size test.db-journal] - 12]
-  puts -nonewline $f "\00\00\00\00"
-  close $f
-} {}
-do_test crash-7.2 {
-  signature
-} $sig
-
-finish_test