Move bundled copy of sqlite one level deeper to better separate it...

third_party/sqlite/test/ioerr5.test

Index: third_party/sqlite/test/ioerr5.test
===================================================================
--- third_party/sqlite/test/ioerr5.test	(revision 56608)
+++ third_party/sqlite/test/ioerr5.test	(working copy)
@@ -1,221 +0,0 @@
-# 2008 May 12
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-#
-# This file tests that if sqlite3_release_memory() is called to reclaim
-# memory from a pager that is in the error-state, SQLite does not 
-# incorrectly write dirty pages out to the database (not safe to do
-# once the pager is in error state).
-#
-# $Id: ioerr5.test,v 1.5 2008/08/28 18:35:34 danielk1977 Exp $
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-
-ifcapable !memorymanage||!shared_cache {
-  finish_test
-  return
-}
-
-db close
-
-set ::enable_shared_cache [sqlite3_enable_shared_cache 1]
-set ::soft_limit [sqlite3_soft_heap_limit 1048576]
-
-# This procedure prepares, steps and finalizes an SQL statement via the
-# UTF-16 APIs. The text representation of an SQLite error code is returned
-# ("SQLITE_OK", "SQLITE_IOERR" etc.). The actual results returned by the
-# SQL statement, if it is a SELECT, are not available.
-#
-# This can be useful for testing because it forces SQLite to make an extra 
-# call to sqlite3_malloc() when translating from the supplied UTF-16 to
-# the UTF-8 encoding used internally.
-#
-proc dosql16 {zSql {db db}} {
-  set sql [encoding convertto unicode $zSql]
-  append sql "\00\00"
-  set stmt [sqlite3_prepare16 $db $sql -1 {}]
-  sqlite3_step $stmt
-  set rc [sqlite3_finalize $stmt]
-}
-
-proc compilesql16 {zSql {db db}} {
-  set sql [encoding convertto unicode $zSql]
-  append sql "\00\00"
-  set stmt [sqlite3_prepare16 $db $sql -1 {}]
-  set rc [sqlite3_finalize $stmt]
-}
-
-# Open two database connections (handle db and db2) to database "test.db".
-#
-proc opendatabases {} {
-  catch {db close}
-  catch {db2 close}
-  sqlite3 db test.db
-  sqlite3 db2 test.db
-  db2 cache size 0
-  db cache size 0
-  execsql {
-    pragma page_size=512;
-    pragma auto_vacuum=2;
-    pragma cache_size=16;
-  }
-}
-
-# Open two database connections and create a single table in the db.
-#
-do_test ioerr5-1.0 {
-  opendatabases
-  execsql { CREATE TABLE A(Id INTEGER, Name TEXT) }
-} {}
-
-foreach locking_mode {normal exclusive} {
-  set nPage 2
-  for {set iFail 1} {$iFail<200} {incr iFail} {
-    sqlite3_soft_heap_limit 1048576
-    opendatabases
-    execsql { pragma locking_mode=exclusive }
-    set nRow [db one {SELECT count(*) FROM a}]
-  
-    # Dirty (at least) one of the pages in the cache.
-    do_test ioerr5-1.$locking_mode-$iFail.1 {
-      execsql {
-        BEGIN EXCLUSIVE;
-        INSERT INTO a VALUES(1, 'ABCDEFGHIJKLMNOP');
-      }
-    } {}
-  
-    # Now try to commit the transaction. Cause an IO error to occur
-    # within this operation, which moves the pager into the error state.
-    #
-    set ::sqlite_io_error_persist 1
-    set ::sqlite_io_error_pending $iFail
-    do_test ioerr5-1.$locking_mode-$iFail.2 {
-      set rc [catchsql {COMMIT}]
-      list
-    } {}
-    set ::sqlite_io_error_hit 0
-    set ::sqlite_io_error_persist 0
-    set ::sqlite_io_error_pending 0
-  
-    # Read the contents of the database file into a Tcl variable.
-    #
-    set fd [open test.db]
-    fconfigure $fd -translation binary -encoding binary
-    set zDatabase [read $fd]
-    close $fd
-
-    # Set a very low soft-limit and then try to compile an SQL statement 
-    # from UTF-16 text. To do this, SQLite will need to reclaim memory
-    # from the pager that is in error state. Including that associated
-    # with the dirty page.
-    #
-    do_test ioerr5-1.$locking_mode-$iFail.3 {
-      set bt [btree_from_db db]
-      sqlite3_soft_heap_limit 1024
-      compilesql16 "SELECT 10"
-      array set stats [btree_pager_stats $bt]
-
-      # If the pager made it all the way to PAGER_SYNCED state, then 
-      # both in-memory pages are clean. Following the calls to 
-      # release_memory() that were made as part of the [compilesql16]
-      # above, there will be zero pages left in the cache.
-      #
-      # If the pager did not make it as far as PAGER_SYNCED, the two
-      # in memory pages are still dirty. So there will be 2 pages left
-      # in the cache following the release_memory() calls.
-      #
-      if {$stats(state)==5} {
-        set nPage 0
-      }
-      expr {$stats(page)==$nPage}
-    } {1}
-
-    # Ensure that nothing was written to the database while reclaiming
-    # memory from the pager in error state.
-    #
-    do_test ioerr5-1.$locking_mode-$iFail.4 {
-      set fd [open test.db]
-      fconfigure $fd -translation binary -encoding binary
-      set zDatabase2 [read $fd]
-      close $fd
-      expr {$zDatabase eq $zDatabase2}
-    } {1}
-  
-    if {$rc eq [list 0 {}]} {
-      do_test ioerr5.1-$locking_mode-$iFail.3 {
-        execsql { SELECT count(*) FROM a }
-      } [expr $nRow+1]
-      break
-    }
-  }
-}
-
-# Make sure this test script doesn't leave any files open.
-#
-do_test ioerr5-1.X {
-  catch { db close }
-  catch { db2 close }
-  set sqlite_open_file_count
-} 0
-
-do_test ioerr5-2.0 {
-  sqlite3 db test.db
-  execsql { CREATE INDEX i1 ON a(id, name); }
-} {}
-
-foreach locking_mode {exclusive normal} {
-  for {set iFail 1} {$iFail<200} {incr iFail} {
-    sqlite3_soft_heap_limit 1048576
-    opendatabases
-    execsql { pragma locking_mode=exclusive }
-    set nRow [db one {SELECT count(*) FROM a}]
-  
-    do_test ioerr5-2.$locking_mode-$iFail.1 {
-      execsql {
-        BEGIN EXCLUSIVE;
-        INSERT INTO a VALUES(1, 'ABCDEFGHIJKLMNOP');
-      }
-    } {}
-
-    set ::sqlite_io_error_persist 1
-    set ::sqlite_io_error_pending $iFail
-
-    sqlite3_release_memory 10000
-
-    set error_hit $::sqlite_io_error_hit
-    set ::sqlite_io_error_hit 0
-    set ::sqlite_io_error_persist 0
-    set ::sqlite_io_error_pending 0
-    if {$error_hit} {
-      do_test ioerr5-2.$locking_mode-$iFail.3a {
-        catchsql COMMIT
-      } {1 {disk I/O error}}
-    } else {
-      do_test ioerr5-2.$locking_mode-$iFail.3b {
-        execsql COMMIT
-      } {}
-      break
-    }
-  }
-}
-
-# Make sure this test script doesn't leave any files open.
-#
-do_test ioerr5-2.X {
-  catch { db close }
-  catch { db2 close }
-  set sqlite_open_file_count
-} 0
-
-sqlite3_enable_shared_cache $::enable_shared_cache
-sqlite3_soft_heap_limit $::soft_limit
-
-finish_test