Move bundled copy of sqlite one level deeper to better separate it...

third_party/sqlite/test/io.test

-# 2007 August 21
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-#
-# The focus of this file is testing some specific characteristics of the 
-# IO traffic generated by SQLite (making sure SQLite is not writing out
-# more database pages than it has to, stuff like that).
-#
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-
-db close
-sqlite3_simulate_device
-sqlite3 db test.db -vfs devsym
-
-# Test summary:
-#
-# io-1.* -  Test that quick-balance does not journal pages unnecessarily.
-#
-# io-2.* -  Test the "atomic-write optimization".
-#
-# io-3.* -  Test the IO traffic enhancements triggered when the 
-#           IOCAP_SEQUENTIAL device capability flag is set (no 
-#           fsync() calls on the journal file).
-#
-# io-4.* -  Test the IO traffic enhancements triggered when the 
-#           IOCAP_SAFE_APPEND device capability flag is set (fewer 
-#           fsync() calls on the journal file, no need to set nRec
-#           field in the single journal header).
-#
-# io-5.* -  Test that the default page size is selected and used 
-#           correctly.
-#           
-
-set ::nWrite 0
-proc nWrite {db} {
-  set bt [btree_from_db $db]
-  db_enter $db
-  array set stats [btree_pager_stats $bt]
-  db_leave $db
-  set res [expr $stats(write) - $::nWrite]
-  set ::nWrite $stats(write)
-  set res
-}
-
-set ::nSync 0
-proc nSync {} {
-  set res [expr {$::sqlite_sync_count - $::nSync}]
-  set ::nSync $::sqlite_sync_count
-  set res
-}
-
-do_test io-1.1 {
-  execsql {
-    PRAGMA auto_vacuum = OFF;
-    PRAGMA page_size = 1024;
-    CREATE TABLE abc(a,b);
-  }
-  nWrite db
-} {2}
-
-# Insert into the table 4 records of aproximately 240 bytes each.
-# This should completely fill the root-page of the table. Each
-# INSERT causes 2 db pages to be written - the root-page of "abc"
-# and page 1 (db change-counter page).
-do_test io-1.2 {
-  set ret [list]
-  execsql { INSERT INTO abc VALUES(1,randstr(230,230)); }
-  lappend ret [nWrite db]
-  execsql { INSERT INTO abc VALUES(2,randstr(230,230)); }
-  lappend ret [nWrite db]
-  execsql { INSERT INTO abc VALUES(3,randstr(230,230)); }
-  lappend ret [nWrite db]
-  execsql { INSERT INTO abc VALUES(4,randstr(230,230)); }
-  lappend ret [nWrite db]
-} {2 2 2 2}
-
-# Insert another 240 byte record. This causes two leaf pages
-# to be added to the root page of abc. 4 pages in total
-# are written to the db file - the two leaf pages, the root
-# of abc and the change-counter page.
-do_test io-1.3 {
-  execsql { INSERT INTO abc VALUES(5,randstr(230,230)); }
-  nWrite db
-} {4}
-
-# Insert another 3 240 byte records. After this, the tree consists of 
-# the root-node, which is close to empty, and two leaf pages, both of 
-# which are full. 
-do_test io-1.4 {
-  set ret [list]
-  execsql { INSERT INTO abc VALUES(6,randstr(230,230)); }
-  lappend ret [nWrite db]
-  execsql { INSERT INTO abc VALUES(7,randstr(230,230)); }
-  lappend ret [nWrite db]
-  execsql { INSERT INTO abc VALUES(8,randstr(230,230)); }
-  lappend ret [nWrite db]
-} {2 2 2}
-
-# This insert should use the quick-balance trick to add a third leaf
-# to the b-tree used to store table abc. It should only be necessary to
-# write to 3 pages to do this: the change-counter, the root-page and
-# the new leaf page.
-do_test io-1.5 {
-  execsql { INSERT INTO abc VALUES(9,randstr(230,230)); }
-  nWrite db
-} {3}
-
-ifcapable atomicwrite {
-
-#----------------------------------------------------------------------
-# Test cases io-2.* test the atomic-write optimization.
-#
-do_test io-2.1 {
-  execsql { DELETE FROM abc; VACUUM; }
-} {}
-
-# Clear the write and sync counts.
-nWrite db ; nSync
-
-# The following INSERT updates 2 pages and requires 4 calls to fsync():
-#
-#   1) The directory in which the journal file is created,
-#   2) The journal file (to sync the page data),
-#   3) The journal file (to sync the journal file header),
-#   4) The database file.
-#
-do_test io-2.2 {
-  execsql { INSERT INTO abc VALUES(1, 2) }
-  list [nWrite db] [nSync]
-} {2 4}
-
-# Set the device-characteristic mask to include the SQLITE_IOCAP_ATOMIC,
-# then do another INSERT similar to the one in io-2.2. This should
-# only write 1 page and require a single fsync().
-# 
-# The single fsync() is the database file. Only one page is reported as
-# written because page 1 - the change-counter page - is written using
-# an out-of-band method that bypasses the write counter.
-#
-sqlite3_simulate_device -char atomic
-do_test io-2.3 {
-  execsql { INSERT INTO abc VALUES(3, 4) }
-  list [nWrite db] [nSync]
-} {1 1}
-
-# Test that the journal file is not created and the change-counter is
-# updated when the atomic-write optimization is used.
-#
-do_test io-2.4.1 {
-  execsql {
-    BEGIN;
-    INSERT INTO abc VALUES(5, 6);
-  }
-  sqlite3 db2 test.db -vfs devsym
-  execsql { SELECT * FROM abc } db2
-} {1 2 3 4}
-do_test io-2.4.2 {
-  file exists test.db-journal
-} {0}
-do_test io-2.4.3 {
-  execsql { COMMIT }
-  execsql { SELECT * FROM abc } db2
-} {1 2 3 4 5 6}
-db2 close
-
-# Test that the journal file is created and sync()d if the transaction
-# modifies more than one database page, even if the IOCAP_ATOMIC flag
-# is set.
-#
-do_test io-2.5.1 {
-  execsql { CREATE TABLE def(d, e) }
-  nWrite db ; nSync
-  execsql {
-    BEGIN;
-    INSERT INTO abc VALUES(7, 8);
-  }
-  file exists test.db-journal
-} {0}
-do_test io-2.5.2 {
-  execsql { INSERT INTO def VALUES('a', 'b'); }
-  file exists test.db-journal
-} {1}
-do_test io-2.5.3 {
-  execsql { COMMIT }
-  list [nWrite db] [nSync]
-} {3 4}
-
-# Test that the journal file is created and sync()d if the transaction
-# modifies a single database page and also appends a page to the file.
-# Internally, this case is handled differently to the one above. The
-# journal file is not actually created until the 'COMMIT' statement
-# is executed.
-#
-do_test io-2.6.1 {
-  execsql {
-    BEGIN;
-    INSERT INTO abc VALUES(9, randstr(1000,1000));
-  }
-  file exists test.db-journal
-} {0}
-do_test io-2.6.2 {
-  # Create a file at "test.db-journal". This will prevent SQLite from
-  # opening the journal for exclusive access. As a result, the COMMIT
-  # should fail with SQLITE_CANTOPEN and the transaction rolled back.
-  #
-  file mkdir test.db-journal
-  catchsql { COMMIT }
-} {1 {unable to open database file}}
-do_test io-2.6.3 {
-  file delete -force test.db-journal
-  catchsql { COMMIT }
-} {1 {cannot commit - no transaction is active}}
-do_test io-2.6.4 {
-  execsql { SELECT * FROM abc }
-} {1 2 3 4 5 6 7 8}
-
-# Test that if the database modification is part of multi-file commit,
-# the journal file is always created. In this case, the journal file
-# is created during execution of the COMMIT statement, so we have to
-# use the same technique to check that it is created as in the above 
-# block.
-file delete -force test2.db test2.db-journal
-ifcapable attach {
-  do_test io-2.7.1 {
-    execsql {
-      ATTACH 'test2.db' AS aux;
-      PRAGMA aux.page_size = 1024;
-      CREATE TABLE aux.abc2(a, b);
-      BEGIN;
-      INSERT INTO abc VALUES(9, 10);
-    }
-    file exists test.db-journal
-  } {0}
-  do_test io-2.7.2 {
-    execsql { INSERT INTO abc2 SELECT * FROM abc }
-    file exists test2.db-journal
-  } {0}
-  do_test io-2.7.3 {
-    execsql { SELECT * FROM abc UNION ALL SELECT * FROM abc2 }
-  } {1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10}
-  do_test io-2.7.4 {
-    file mkdir test2.db-journal
-    catchsql { COMMIT }
-  } {1 {unable to open database file}}
-  do_test io-2.7.5 {
-    file delete -force test2.db-journal
-    catchsql { COMMIT }
-  } {1 {cannot commit - no transaction is active}}
-  do_test io-2.7.6 {
-    execsql { SELECT * FROM abc UNION ALL SELECT * FROM abc2 }
-  } {1 2 3 4 5 6 7 8}
-}
-
-# Try an explicit ROLLBACK before the journal file is created.
-#
-do_test io-2.8.1 {
-  execsql {
-    BEGIN;
-    DELETE FROM abc;
-  }
-  file exists test.db-journal
-} {0}
-do_test io-2.8.2 {
-  execsql { SELECT * FROM abc }
-} {}
-do_test io-2.8.3 {
-  execsql {
-    ROLLBACK;
-    SELECT * FROM abc;
-  }
-} {1 2 3 4 5 6 7 8}
-
-# Test that the atomic write optimisation is not enabled if the sector
-# size is larger than the page-size.
-#
-do_test io-2.9.1 {
-  db close
-  sqlite3 db test.db
-  sqlite3_simulate_device -char atomic -sectorsize 2048
-  execsql {
-    BEGIN;
-    INSERT INTO abc VALUES(9, 10);
-  }
-  file exists test.db-journal
-} {1}
-do_test io-2.9.2 {
-  execsql { ROLLBACK; }
-  db close
-  file delete -force test.db test.db-journal
-  sqlite3 db test.db -vfs devsym
-  execsql {
-    PRAGMA auto_vacuum = OFF;
-    PRAGMA page_size = 2048;
-    CREATE TABLE abc(a, b);
-  }
-  execsql {
-    BEGIN;
-    INSERT INTO abc VALUES(9, 10);
-  }
-  file exists test.db-journal
-} {0}
-do_test io-2.9.3 {
-  execsql { COMMIT }
-} {}
-
-# Test a couple of the more specific IOCAP_ATOMIC flags 
-# (i.e IOCAP_ATOMIC2K etc.).
-#
-do_test io-2.10.1 {
-  sqlite3_simulate_device -char atomic1k
-  execsql {
-    BEGIN;
-    INSERT INTO abc VALUES(11, 12);
-  }
-  file exists test.db-journal
-} {1}
-do_test io-2.10.2 {
-  execsql { ROLLBACK }
-  sqlite3_simulate_device -char atomic2k
-  execsql {
-    BEGIN;
-    INSERT INTO abc VALUES(11, 12);
-  }
-  file exists test.db-journal
-} {0}
-do_test io-2.10.3 {
-  execsql { ROLLBACK }
-} {}
-
-do_test io-2.11.0 {
-  execsql { 
-    PRAGMA locking_mode = exclusive;
-    PRAGMA locking_mode;
-  }
-} {exclusive exclusive}
-do_test io-2.11.1 {
-  execsql { 
-    INSERT INTO abc VALUES(11, 12);
-  }
-  file exists test.db-journal
-} {0}
-
-do_test io-2.11.2 {
-  execsql { 
-    PRAGMA locking_mode = normal;
-    INSERT INTO abc VALUES(13, 14);
-  }
-  file exists test.db-journal
-} {0}
-
-} ;# /* ifcapable atomicwrite */
-
-#----------------------------------------------------------------------
-# Test cases io-3.* test the IOCAP_SEQUENTIAL optimization.
-#
-sqlite3_simulate_device -char sequential -sectorsize 0
-ifcapable pager_pragmas {
-  do_test io-3.1 {
-    db close
-    file delete -force test.db test.db-journal
-    sqlite3 db test.db -vfs devsym
-    db eval {
-      PRAGMA auto_vacuum=OFF;
-    }
-    # File size might be 1 due to the hack to work around ticket #3260.
-    # Search for #3260 in os_unix.c for additional information.
-    expr {[file size test.db]>1}
-  } {0}
-  do_test io-3.2 {
-    execsql { CREATE TABLE abc(a, b) }
-    nSync
-    execsql {
-      PRAGMA temp_store = memory;
-      PRAGMA cache_size = 10;
-      BEGIN;
-      INSERT INTO abc VALUES('hello', 'world');
-      INSERT INTO abc SELECT * FROM abc;
-      INSERT INTO abc SELECT * FROM abc;
-      INSERT INTO abc SELECT * FROM abc;
-      INSERT INTO abc SELECT * FROM abc;
-      INSERT INTO abc SELECT * FROM abc;
-      INSERT INTO abc SELECT * FROM abc;
-      INSERT INTO abc SELECT * FROM abc;
-      INSERT INTO abc SELECT * FROM abc;
-      INSERT INTO abc SELECT * FROM abc;
-      INSERT INTO abc SELECT * FROM abc;
-      INSERT INTO abc SELECT * FROM abc;
-    }
-    # File has grown - showing there was a cache-spill - but there 
-    # have been no calls to fsync(). The file is probably about 30KB.
-    # But some VFS implementations (symbian) buffer writes so the actual
-    # size may be a little less than that. So this test case just tests
-    # that the file is now greater than 20000 bytes in size.
-    list [expr [file size test.db]>20000] [nSync]
-  } {1 0}
-  do_test io-3.3 {
-    # The COMMIT requires a single fsync() - to the database file.
-    execsql { COMMIT }
-    list [file size test.db] [nSync]
-  } {39936 1}
-}
-
-#----------------------------------------------------------------------
-# Test cases io-4.* test the IOCAP_SAFE_APPEND optimization.
-#
-sqlite3_simulate_device -char safe_append
-
-# With the SAFE_APPEND flag set, simple transactions require 3, rather
-# than 4, calls to fsync(). The fsync() calls are on:
-#
-#   1) The directory in which the journal file is created, (unix only)
-#   2) The journal file (to sync the page data),
-#   3) The database file.
-#
-# Normally, when the SAFE_APPEND flag is not set, there is another fsync()
-# on the journal file between steps (2) and (3) above.
-#
-set expected_sync_count 2
-if {$::tcl_platform(platform)=="unix"} {
-  ifcapable dirsync {
-    incr expected_sync_count
-  }
-}
-
-do_test io-4.1 {
-  execsql { DELETE FROM abc }
-  nSync
-  execsql { INSERT INTO abc VALUES('a', 'b') }
-  nSync
-} $expected_sync_count
-
-# With SAFE_APPEND set, the nRec field of the journal file header should
-# be set to 0xFFFFFFFF before the first journal sync. The nRec field
-# occupies bytes 8-11 of the journal file.
-#
-do_test io-4.2.1 {
-  execsql { BEGIN }
-  execsql { INSERT INTO abc VALUES('c', 'd') }
-  file exists test.db-journal
-} {1}
-if {$::tcl_platform(platform)=="unix"} {
-  do_test io-4.2.2 {
-    hexio_read test.db-journal 8 4
-  } {FFFFFFFF}
-}
-do_test io-4.2.3 {
-  execsql { COMMIT }
-  nSync
-} $expected_sync_count
-sqlite3_simulate_device -char safe_append
-
-# With SAFE_APPEND set, there should only ever be one journal-header
-# written to the database, even though the sync-mode is "full".
-#
-do_test io-4.3.1 {
-  execsql {
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-    INSERT INTO abc SELECT * FROM abc;
-  }
-  expr {[file size test.db]/1024}
-} {43}
-ifcapable pager_pragmas {
-  do_test io-4.3.2 {
-    execsql {
-      PRAGMA synchronous = full;
-      PRAGMA cache_size = 10;
-      PRAGMA synchronous;
-    }
-  } {2}
-}
-do_test io-4.3.3 {
-  execsql {
-    BEGIN;
-    UPDATE abc SET a = 'x';
-  }
-  file exists test.db-journal
-} {1}
-if {$tcl_platform(platform) != "symbian"} {
-  # This test is not run on symbian because the file-buffer makes it
-  # difficult to predict the exact size of the file as reported by 
-  # [file size].
-  do_test io-4.3.4 {
-    # The UPDATE statement in the statement above modifies 41 pages 
-    # (all pages in the database except page 1 and the root page of 
-    # abc). Because the cache_size is set to 10, this must have required
-    # at least 4 cache-spills. If there were no journal headers written
-    # to the journal file after the cache-spill, then the size of the
-    # journal file is give by:
-    #
-    #    <jrnl file size> = <jrnl header size> + nPage * (<page-size> + 8)
-    #
-    # If the journal file contains additional headers, this formula
-    # will not predict the size of the journal file.
-    #
-    file size test.db-journal
-  } [expr 512 + (1024+8)*41]
-}
-
-#----------------------------------------------------------------------
-# Test cases io-5.* test that the default page size is selected and
-# used correctly.
-#
-set tn 0
-foreach {char                 sectorsize pgsize} {
-         {}                     512      1024
-         {}                    1024      1024
-         {}                    2048      2048
-         {}                    8192      8192
-         {}                   16384      8192
-         {atomic}               512      8192
-         {atomic512}            512      1024
-         {atomic2K}             512      2048
-         {atomic2K}            4096      4096
-         {atomic2K atomic}      512      8192
-         {atomic64K}            512      1024
-} {
-  incr tn
-  if {$pgsize>$::SQLITE_MAX_PAGE_SIZE} continue
-  db close
-  file delete -force test.db test.db-journal
-  sqlite3_simulate_device -char $char -sectorsize $sectorsize
-  sqlite3 db test.db -vfs devsym
-  db eval {
-    PRAGMA auto_vacuum=OFF;
-  }
-  ifcapable !atomicwrite {
-    if {[regexp {^atomic} $char]} continue
-  }
-  do_test io-5.$tn {
-    execsql {
-      CREATE TABLE abc(a, b, c);
-    }
-    expr {[file size test.db]/2}
-  } $pgsize
-}
-
-sqlite3_simulate_device -char {} -sectorsize 0
-finish_test