[PATCH 4/5] update_bootloaders.sh, create_esp.sh: add two helpers

update_bootloaders.sh

+#!/bin/bash
+
+# Copyright (c) 2010 The Chromium OS Authors. All rights reserved.
+# Use of this source code is governed by a BSD-style license that can be
+# found in the LICENSE file.
+
+# Helper script that generates the legacy/efi bootloader partitions.
+# It does not populate the templates, but can update a loop device.
+
+. "$(dirname "$0")/common.sh"
+. "$(dirname "$0")/chromeos-common.sh"  # installer
+
+get_default_board
+
+# Flags.
+DEFINE_string arch "x86" \
+  "The boot architecture: arm or x86. (Default: x86)"
+# TODO(wad) once extlinux is dead, we can remove this.
+DEFINE_boolean install_syslinux ${FLAGS_FALSE} \
+  "Controls whether syslinux is run on 'to'. (Default: false)"
+DEFINE_string from "/tmp/boot" \
+  "Path the legacy bootloader templates are copied from. (Default /tmp/boot)"
+DEFINE_string to "/tmp/esp.img" \
+  "Path to esp image or ARM output MBR (Default: /tmp/esp.img)"
+DEFINE_string vmlinuz "/tmp/vmlinuz" \
+  "Path to the vmlinuz file to use (Default: /tmp/vmlinuz)"
+# The kernel_partition and the kernel_cmdline each are used to supply
+# verified boot configuration: dm="".
+DEFINE_string kernel_partition "/tmp/vmlinuz.image" \
+  "Path to the signed kernel image. (Default: /tmp/vmlinuz.image)"
+DEFINE_string kernel_cmdline "" \
+  "Kernel commandline if no kernel_partition given. (Default: '')"
+DEFINE_string kernel_partition_offset "0" \
+  "Offset to the kernel partition [KERN-A] (Default: 0)"
+DEFINE_string kernel_partition_sectors "0" \
+  "Kernel partition sectors (Default: 0)"
+DEFINE_string usb_disk /dev/sdb3 \
+  "Path syslinux should use to do a usb (or arm!) boot. Default: /dev/sdb3"
+
+# Parse flags
+FLAGS "$@" || exit 1
+eval set -- "${FLAGS_ARGV}"
+set -e
+
+# If not provided by chromeos-common.sh, this will update all of the
+# boot loader files (both A and B) with the data pulled
+# from the kernel_partition.  The default boot target should
+# be set when the rootfs is stuffed.
+if ! type -p update_x86_bootloaders; then
+  update_x86_bootloaders() {

[adlr, 2010/07/02 20:42:05]

what's w/ defining this fn in 2 places? is it a temporary thing (in this stream
of patches)? (per IM discussion, i see it's a temporary measure so avoid having
to do 2 commit simultaneously. that's fine)

+    local old_root="$1"  # e.g., sd%D%P
+    local kernel_cmdline="$2"
+    local esp_fs_dir="$3"
+    local template_dir="$4"
+
+    # Pull out the dm="" values
+    dm_table=$(echo "$kernel_cmdline" | sed -s 's/.*dm="\([^"]*\)".*/\1/')
+
+    # Rewrite grub table
+    grub_dm_table_a=${dm_table//${old_root}/\$linuxpartA}
+    grub_dm_table_b=${dm_table//${old_root}/\$linuxpartB}
+    sed -e "s|DMTABLEA|${grub_dm_table_a}|g" \
+        -e "s|DMTABLEB|${grub_dm_table_b}|g" \
+        "${template_dir}"/efi/boot/grub.cfg |
+        sudo dd of="${esp_fs_dir}"/efi/boot/grub.cfg
+
+    # Rewrite syslinux DM_TABLE
+    usb_target="${FLAGS_usb_disk//\//\\\/}"
+    syslinux_dm_table_usb=${dm_table//\/dev\/${old_root}/${usb_target}}
+    sed -e "s|DMTABLEA|${syslinux_dm_table_usb}|g" \
+        "${template_dir}"/syslinux/usb.A.cfg |
+        sudo dd of="${esp_fs_dir}"/syslinux/usb.A.cfg
+
+    syslinux_dm_table_a=${dm_table//\/dev\/${old_root}/HDROOTA}
+    sed -e "s|DMTABLEA|${syslinux_dm_table_a}|g" \
+        "${template_dir}"/syslinux/root.A.cfg |
+        sudo dd of="${esp_fs_dir}"/syslinux/root.A.cfg
+
+    syslinux_dm_table_b=${dm_table//\/dev\/${old_root}/HDROOTB}
+    sed -e "s|DMTABLEA|${syslinux_dm_table_a}|g" \
+        "${template_dir}"/syslinux/root.B.cfg |
+        sudo dd of="${esp_fs_dir}"/syslinux/root.B.cfg
+
+    # Copy the vmlinuz's into place for syslinux
+    sudo cp -f "${template_dir}"/vmlinuz "${esp_fs_dir}"/syslinux/vmlinuz.A
+    sudo cp -f "${template_dir}"/vmlinuz "${esp_fs_dir}"/syslinux/vmlinuz.B
+
+    # The only work left for the installer is to pick the correct defaults
+    # and replace HDROOTA and HDROOTB with the correct /dev/sd%D%P.
+  }
+fi
+
+ESP_DEV=
+if [[ ! -e "${FLAGS_to}" ]]; then
+  error "The ESP doesn't exist"
+  # This shouldn't happen.

[adlr, 2010/07/02 20:42:05]

can you call the other script here?

+  info "Creating a new esp image at ${FLAGS_to}" anyway.
+  # Create EFI System Partition to boot stock EFI BIOS (but not ChromeOS EFI
+  # BIOS). We only need this for x86, but it's simpler and safer to keep the
+  # disk images the same for both x86 and ARM.
+  # NOTE: The size argument for mkfs.vfat is in 1024-byte blocks.
+  # We'll hard-code it to 16M for now.
+  ESP_BLOCKS=16384
+  /usr/sbin/mkfs.vfat -C "${FLAGS_to}" ${ESP_BLOCKS}
+  ESP_DEV=$(sudo losetup -f)
+  test -z "${ESP_DEV}" && error "No free loop devices."
+  sudo losetup "${ESP_DEV}" "${FLAGS_to}"
+else
+  if [[ -f "${FLAGS_to}" ]]; then
+    ESP_DEV=$(sudo losetup -f)
+    test -z "${ESP_DEV}" && error "No free loop devices."
+    sudo losetup "${ESP_DEV}" "${FLAGS_to}"
+  else
+    # If it is a block device or something else, try to mount it anyway.
+    ESP_DEV="${FLAGS_to}"
+  fi
+fi
+
+ESP_FS_DIR=$(mktemp -d /tmp/esp.XXXXXX)
+cleanup() {
+  set +e
+  sudo umount "${ESP_FS_DIR}"
+  if [[ -n "${ESP_DEV}" && -z "${ESP_DEV//\/dev\/loop*}" ]]; then
+    sudo losetup -d  "${ESP_DEV}"
+  fi
+  rm -rf "${ESP_FS_DIR}"
+}
+trap cleanup EXIT
+sudo mount "${ESP_DEV}" "${ESP_FS_DIR}"
+
+if [[ "${FLAGS_arch}" = "x86" ]]; then
+  # Populate the EFI bootloader configuration
+  sudo mkdir -p "${ESP_FS_DIR}/efi/boot"
+  sudo cp "${FLAGS_from}"/efi/boot/bootx64.efi \
+          "${ESP_FS_DIR}/efi/boot/bootx64.efi"
+  sudo cp "${FLAGS_from}/efi/boot/grub.cfg" \
+          "${ESP_FS_DIR}/efi/boot/grub.cfg"
+
+  # Prepopulate the syslinux directories too and update for verified boot values
+  # after the rootfs work is done.
+  sudo mkdir -p "${ESP_FS_DIR}"/syslinux
+  sudo cp -r "${FLAGS_from}"/syslinux/. "${ESP_FS_DIR}"/syslinux
+
+  # Stage both kernels with the only one we built.
+  sudo cp -f "${FLAGS_vmlinuz}" "${ESP_FS_DIR}"/syslinux/vmlinuz.A
+  sudo cp -f "${FLAGS_vmlinuz}" "${ESP_FS_DIR}"/syslinux/vmlinuz.B
+
+  # Extract kernel flags
+  kernel_cfg=
+  old_root="sd%D%P"
+  if [[ -n "${FLAGS_kernel_cmdline}" ]]; then
+    info "Using supplied kernel_cmdline to update templates."
+    kernel_cfg="${FLAGS_kernel_cmdline}"
+  elif [[ -n "${FLAGS_kernel_partition}" ]]; then
+    info "Extracting the kernel command line from ${FLAGS_kernel_partition}"
+    kernel_cfg=$(dump_kernel_config "${FLAGS_kernel_partition}")
+  fi
+  update_x86_bootloaders "${old_root}" \
+                         "${kernel_cfg}" \
+                         "${ESP_FS_DIR}" \
+                         "${FLAGS_from}"
+
+  # Install the syslinux loader on the ESP image (part 12) so it is ready when
+  # we cut over from rootfs booting (extlinux).
+  if [[ ${FLAGS_install_syslinux} -eq ${FLAGS_TRUE} ]]; then
+    sudo umount "${ESP_FS_DIR}"
+    sudo syslinux -d /syslinux "${FLAGS_to}"
+  fi
+elif [[ "${FLAGS_arch}" = "arm" ]]; then
+  # Extract kernel flags
+  kernel_cfg=
+  old_root="sd%D%P"
+  if [[ -n "${FLAGS_kernel_cmdline}" ]]; then
+    info "Using supplied kernel_cmdline to update templates."
+    kernel_cfg="${FLAGS_kernel_cmdline}"
+  elif [[ -n "${FLAGS_kernel_partition}" ]]; then
+    info "Extracting the kernel command line from ${FLAGS_kernel_partition}"
+    kernel_cfg=$(dump_kernel_config "${kernel_partition}")
+  fi
+  dm_table=$(echo "$kernel_cfg" | sed -s 's/.*dm="\([^"]*\)".*/\1/')
+  # TODO(wad) assume usb_disk contains the arm boot location for now.
+  new_root="${FLAGS_usb_disk}"
+  info "Replacing dm slave devices with /dev/${new_root}"
+  dm_table="${dm_table//ROOT_DEV/\/dev\/${new_root}}"
+  dm_table="${dm_table//HASH_DEV/\/dev\/${new_root}}"
+
+  warn "FIXME: cannot replace root= here for the arm bootloader yet."
+  dm_table=""  # TODO(wad) Clear it until we can fix root=/dev/dm-0
+
+  local device=1
+  local MBR_SCRIPT_UIMG=$(make_arm_mbr \
+    ${FLAGS_kernel_partition_offset} \
+    ${FLAGS_kernel_partition_sectors} \
+    ${device} \
+    "'dm=\"${dm_table}\"'")
+  sudo dd bs=1 count=`stat --printf="%s" ${MBR_SCRIPT_UIMG}` \
+     if="$MBR_SCRIPT_UIMG" of=${FLAGS_to} conv=notrunc
+  info "Emitted new ARM MBR to ${FLAGS_to}"
+fi
+
+set +e