Initial commit of upstream NSPR (4.7.3) and NSS3 (3.12).

third_party/nspr/mozilla/nsprpub/pr/include/md/_winnt.h

Index: third_party/nspr/mozilla/nsprpub/pr/include/md/_winnt.h
diff --git a/third_party/nspr/mozilla/nsprpub/pr/include/md/_winnt.h b/third_party/nspr/mozilla/nsprpub/pr/include/md/_winnt.h
new file mode 100644
index 0000000000000000000000000000000000000000..b5d0143e80fc8294466d6d8fa13e4ccadc9d6f7e
--- /dev/null
+++ b/third_party/nspr/mozilla/nsprpub/pr/include/md/_winnt.h
@@ -0,0 +1,623 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#ifndef nspr_win32_defs_h___
+#define nspr_win32_defs_h___
+
+/* Need to force service-pack 3 extensions to be defined by
+** setting _WIN32_WINNT to NT 4.0 for winsock.h, winbase.h, winnt.h.
+*/ 
+#ifndef  _WIN32_WINNT
+    #define _WIN32_WINNT 0x0400
+#elif   (_WIN32_WINNT < 0x0400)
+    #undef  _WIN32_WINNT
+    #define _WIN32_WINNT 0x0400
+#endif /* _WIN32_WINNT */
+
+#include <windows.h>
+#include <winsock.h>
+#ifdef __MINGW32__
+#include <mswsock.h>
+#endif
+#include <errno.h>
+
+#include "prio.h"
+#include "prclist.h"
+
+/*
+ * Internal configuration macros
+ */
+
+#define PR_LINKER_ARCH      "win32"
+#define _PR_SI_SYSNAME        "WINNT"
+#if defined(_M_IX86) || defined(_X86_)
+#define _PR_SI_ARCHITECTURE   "x86"
+#elif defined(_AMD64_)
+#define _PR_SI_ARCHITECTURE   "x86-64"
+#elif defined(_IA64_)
+#define _PR_SI_ARCHITECTURE   "ia64"
+#else
+#error unknown processor architecture
+#endif
+
+#define HAVE_DLL
+#define HAVE_CUSTOM_USER_THREADS
+#define HAVE_THREAD_AFFINITY
+#define _PR_HAVE_GETADDRINFO
+#define _PR_INET6_PROBE
+#ifndef _PR_INET6
+#define AF_INET6 23
+/* newer ws2tcpip.h provides these */
+#ifndef AI_CANONNAME
+#define AI_CANONNAME 0x2
+#define AI_NUMERICHOST 0x4
+#define NI_NUMERICHOST 0x02
+struct addrinfo {
+    int ai_flags;
+    int ai_family;
+    int ai_socktype;
+    int ai_protocol;
+    size_t ai_addrlen;
+    char *ai_canonname;
+    struct sockaddr *ai_addr;
+    struct addrinfo *ai_next;
+};
+#endif
+#define _PR_HAVE_MD_SOCKADDR_IN6
+/* isomorphic to struct in6_addr on Windows */
+struct _md_in6_addr {
+    union {
+        PRUint8  _S6_u8[16];
+        PRUint16 _S6_u16[8];
+    } _S6_un;
+};
+/* isomorphic to struct sockaddr_in6 on Windows */
+struct _md_sockaddr_in6 {
+    PRInt16 sin6_family;
+    PRUint16 sin6_port;
+    PRUint32 sin6_flowinfo;
+    struct _md_in6_addr sin6_addr;
+    PRUint32 sin6_scope_id;
+};
+#endif
+#define _PR_HAVE_THREADSAFE_GETHOST
+#define _PR_HAVE_ATOMIC_OPS
+#if defined(_M_IX86) || defined(_X86_)
+#define _PR_HAVE_ATOMIC_CAS
+#endif
+#define PR_HAVE_WIN32_NAMED_SHARED_MEMORY
+#define _PR_HAVE_PEEK_BUFFER
+#define _PR_PEEK_BUFFER_MAX (32 * 1024)
+#define _PR_FD_NEED_EMULATE_MSG_PEEK(fd) \
+    (!(fd)->secret->nonblocking && (fd)->secret->inheritable != _PR_TRI_TRUE)
+#define _PR_NEED_SECRET_AF
+
+/* --- Common User-Thread/Native-Thread Definitions --------------------- */
+
+/* --- Globals --- */
+extern struct PRLock                      *_pr_schedLock;
+
+/* --- Typedefs --- */
+typedef void (*FiberFunc)(void *);
+
+#define PR_NUM_GCREGS           8
+typedef PRInt32	                PR_CONTEXT_TYPE[PR_NUM_GCREGS];
+#define GC_VMBASE               0x40000000
+#define GC_VMLIMIT              0x00FFFFFF
+
+#define _MD_MAGIC_THREAD	0x22222222
+#define _MD_MAGIC_THREADSTACK	0x33333333
+#define _MD_MAGIC_SEGMENT	0x44444444
+#define _MD_MAGIC_DIR		0x55555555
+
+struct _MDCPU {
+    int              unused;
+};
+
+enum _MDIOModel {
+    _MD_BlockingIO = 0x38,
+    _MD_MultiWaitIO = 0x49
+};
+
+typedef struct _MDOverlapped {
+    OVERLAPPED overlapped;              /* Used for async I/O */
+
+    enum _MDIOModel ioModel;            /* The I/O model to implement
+                                         * using overlapped I/O.
+                                         */
+    union {
+        struct _MDThread *mdThread;     /* For blocking I/O, this structure
+                                         * is embedded in the _MDThread
+                                         * structure.
+                                         */
+        struct {
+            PRCList links;              /* for group->io_ready list */
+            struct PRRecvWait *desc;    /* For multiwait I/O, this structure
+                                         * is associated with a PRRecvWait
+                                         * structure.
+                                         */
+            struct PRWaitGroup *group;
+            struct TimerEvent *timer;
+            DWORD error;
+        } mw;
+    } data;
+} _MDOverlapped;
+
+struct _MDThread {
+        /* The overlapped structure must be first! */
+    struct _MDOverlapped overlapped;    /* Used for async IO for this thread */
+    void            *acceptex_buf;      /* Used for AcceptEx() */
+    TRANSMIT_FILE_BUFFERS *xmit_bufs;   /* Used for TransmitFile() */
+    HANDLE           blocked_sema;      /* Threads block on this when waiting
+                                         * for IO or CondVar.
+                                         */
+    PRInt32          blocked_io_status; /* Status of the completed IO */
+    PRInt32          blocked_io_bytes;  /* Bytes transferred for completed IO */
+    PRInt32          blocked_io_error;  /* Save error if status is FALSE */
+    HANDLE           handle;
+    PRUint32         id;
+    void            *sp;                /* only valid when suspended */
+    PRUint32         magic;             /* for debugging */
+    PR_CONTEXT_TYPE  gcContext;         /* Thread context for GC */
+	struct _PRCPU    *thr_bound_cpu;		/* thread bound to cpu */
+	PRBool   		 interrupt_disabled;/* thread cannot be interrupted */
+	HANDLE 			 thr_event;			/* For native-threads-only support,
+											thread blocks on this event		*/
+
+    /* The following are used only if this is a fiber */
+    void            *fiber_id;          /* flag whether or not this is a fiber*/
+    FiberFunc        fiber_fn;          /* main fiber routine */
+    void            *fiber_arg;         /* arg to main fiber routine */
+    PRUint32         fiber_stacksize;   /* stacksize for fiber */
+    PRInt32          fiber_last_error;  /* last error for the fiber */
+    void (*start)(void *);              /* used by _PR_MD_CREATE_THREAD to
+                                         * pass its 'start' argument to
+                                         * pr_root. */
+};
+
+struct _MDThreadStack {
+    PRUint32           magic;          /* for debugging */
+};
+
+struct _MDSegment {
+    PRUint32           magic;          /* for debugging */
+};
+
+#undef PROFILE_LOCKS
+
+struct _MDLock {
+    CRITICAL_SECTION mutex;          /* this is recursive on NT */
+#ifdef PROFILE_LOCKS
+    PRInt32 hitcount;
+    PRInt32 misscount;
+#endif
+};
+
+struct _MDDir {
+    HANDLE           d_hdl;
+    WIN32_FIND_DATA  d_entry;
+    PRBool           firstEntry;     /* Is this the entry returned
+                                      * by FindFirstFile()? */
+    PRUint32         magic;          /* for debugging */
+};
+
+struct _MDCVar {
+    PRUint32         unused;
+};
+
+struct _MDSemaphore {
+    HANDLE           sem;
+};
+
+struct _MDFileDesc {
+    PROsfd osfd;     /* The osfd can come from one of three spaces:
+                      * - For stdin, stdout, and stderr, we are using
+                      *   the libc file handle (0, 1, 2), which is an int.
+                      * - For files and pipes, we are using Win32 HANDLE,
+                      *   which is a void*.
+                      * - For sockets, we are using Winsock SOCKET, which
+                      *   is a u_int.
+                      */
+    PRBool io_model_committed;  /* The io model (blocking or nonblocking)
+                                 * for this osfd has been committed and
+                                 * cannot be changed.  The osfd has been
+                                 * either associated with the io
+                                 * completion port or made nonblocking. */
+    PRBool sync_file_io;        /* Use synchronous file I/O on the osfd
+                                 * (a file handle) */
+    PRBool accepted_socket;     /* Is this an accepted socket (on the
+                                 * server side)? */
+    PRNetAddr peer_addr;        /* If this is an accepted socket, cache
+                                 * the peer's address returned by
+                                 * AcceptEx().  This is to work around
+                                 * the bug that getpeername() on an
+                                 * socket accepted by AcceptEx() returns
+                                 * an all-zero net address. */
+};
+
+struct _MDProcess {
+    HANDLE handle;
+    DWORD id;
+};
+
+
+/* --- Misc stuff --- */
+#define _MD_GET_SP(thread)            (thread)->md.gcContext[6]
+
+/* --- NT security stuff --- */
+
+extern void _PR_NT_InitSids(void);
+extern void _PR_NT_FreeSids(void);
+extern PRStatus _PR_NT_MakeSecurityDescriptorACL(
+    PRIntn mode,
+    DWORD accessTable[],
+    PSECURITY_DESCRIPTOR *resultSD,
+    PACL *resultACL
+);
+extern void _PR_NT_FreeSecurityDescriptorACL(
+    PSECURITY_DESCRIPTOR pSD, PACL pACL);
+
+/* --- IO stuff --- */
+
+extern PRInt32 _md_Associate(HANDLE);
+extern PRInt32 _PR_MD_CLOSE(PROsfd osfd, PRBool socket);
+
+#define _MD_OPEN                      _PR_MD_OPEN
+#define _MD_OPEN_FILE                 _PR_MD_OPEN_FILE
+#define _MD_READ                      _PR_MD_READ
+#define _MD_WRITE                     _PR_MD_WRITE
+#define _MD_WRITEV                    _PR_MD_WRITEV
+#define _MD_LSEEK                     _PR_MD_LSEEK
+#define _MD_LSEEK64                   _PR_MD_LSEEK64
+#define _MD_CLOSE_FILE(f)             _PR_MD_CLOSE(f, PR_FALSE)
+#define _MD_GETFILEINFO               _PR_MD_GETFILEINFO
+#define _MD_GETFILEINFO64             _PR_MD_GETFILEINFO64
+#define _MD_GETOPENFILEINFO           _PR_MD_GETOPENFILEINFO
+#define _MD_GETOPENFILEINFO64         _PR_MD_GETOPENFILEINFO64
+#define _MD_STAT                      _PR_MD_STAT
+#define _MD_RENAME                    _PR_MD_RENAME     
+#define _MD_ACCESS                    _PR_MD_ACCESS     
+#define _MD_DELETE                    _PR_MD_DELETE     
+#define _MD_MKDIR                     _PR_MD_MKDIR      
+#define _MD_MAKE_DIR                  _PR_MD_MAKE_DIR
+#define _MD_RMDIR                     _PR_MD_RMDIR      
+#define _MD_LOCKFILE                  _PR_MD_LOCKFILE
+#define _MD_TLOCKFILE                 _PR_MD_TLOCKFILE
+#define _MD_UNLOCKFILE                _PR_MD_UNLOCKFILE
+
+/* --- Socket IO stuff --- */
+#define _MD_GET_SOCKET_ERROR()    WSAGetLastError()
+#define _MD_SET_SOCKET_ERROR(_err) WSASetLastError(_err)
+
+#define _MD_INIT_FILEDESC(fd)
+#define _MD_MAKE_NONBLOCK             _PR_MD_MAKE_NONBLOCK
+#define _MD_INIT_FD_INHERITABLE       _PR_MD_INIT_FD_INHERITABLE
+#define _MD_QUERY_FD_INHERITABLE      _PR_MD_QUERY_FD_INHERITABLE
+#define _MD_SHUTDOWN                  _PR_MD_SHUTDOWN
+#define _MD_LISTEN                    _PR_MD_LISTEN
+#define _MD_CLOSE_SOCKET(s)           _PR_MD_CLOSE(s, PR_TRUE)
+#define _MD_SENDTO                    _PR_MD_SENDTO
+#define _MD_RECVFROM                  _PR_MD_RECVFROM
+#define _MD_SOCKETPAIR(s, type, proto, sv) -1
+#define _MD_GETSOCKNAME               _PR_MD_GETSOCKNAME
+#define _MD_GETPEERNAME               _PR_MD_GETPEERNAME
+#define _MD_GETSOCKOPT                _PR_MD_GETSOCKOPT
+#define _MD_SETSOCKOPT                _PR_MD_SETSOCKOPT
+#define _MD_SELECT                    select
+extern int _PR_NTFiberSafeSelect(int, fd_set *, fd_set *, fd_set *,
+    const struct timeval *);
+#define _MD_FSYNC                     _PR_MD_FSYNC
+#define _MD_SOCKETAVAILABLE           _PR_MD_SOCKETAVAILABLE
+#define _MD_PIPEAVAILABLE             _PR_MD_PIPEAVAILABLE
+#define _MD_SET_FD_INHERITABLE        _PR_MD_SET_FD_INHERITABLE
+
+#define _MD_INIT_ATOMIC()
+#if defined(_M_IX86) || defined(_X86_)
+#define _MD_ATOMIC_INCREMENT          _PR_MD_ATOMIC_INCREMENT
+#define _MD_ATOMIC_ADD          	  _PR_MD_ATOMIC_ADD
+#define _MD_ATOMIC_DECREMENT          _PR_MD_ATOMIC_DECREMENT
+#else /* non-x86 processors */
+#define _MD_ATOMIC_INCREMENT(x)       InterlockedIncrement((PLONG)x)
+#define _MD_ATOMIC_ADD(ptr,val)    (InterlockedExchangeAdd((PLONG)ptr, (LONG)val) + val)
+#define _MD_ATOMIC_DECREMENT(x)       InterlockedDecrement((PLONG)x)
+#endif /* x86 */
+#define _MD_ATOMIC_SET(x,y)           InterlockedExchange((PLONG)x, (LONG)y)
+
+#define _MD_INIT_IO                   _PR_MD_INIT_IO
+#define _MD_SOCKET                    _PR_MD_SOCKET
+#define _MD_CONNECT                   _PR_MD_CONNECT
+
+#define _MD_ACCEPT(s, a, l, to)       \
+        _MD_FAST_ACCEPT(s, a, l, to, PR_FALSE, NULL, NULL)
+#define _MD_FAST_ACCEPT(s, a, l, to, fast, cb, cba) \
+        _PR_MD_FAST_ACCEPT(s, a, l, to, fast, cb, cba)
+#define _MD_ACCEPT_READ(s, ns, ra, buf, l, t) \
+        _MD_FAST_ACCEPT_READ(s, ns, ra, buf, l, t, PR_FALSE, NULL, NULL)
+#define _MD_FAST_ACCEPT_READ(s, ns, ra, buf, l, t, fast, cb, cba) \
+        _PR_MD_FAST_ACCEPT_READ(s, ns, ra, buf, l, t, fast, cb, cba)
+#define _MD_UPDATE_ACCEPT_CONTEXT     _PR_MD_UPDATE_ACCEPT_CONTEXT
+
+#define _MD_BIND                      _PR_MD_BIND
+#define _MD_RECV                      _PR_MD_RECV
+#define _MD_SEND                      _PR_MD_SEND
+#define _MD_SENDFILE              	  _PR_MD_SENDFILE
+#define _MD_PR_POLL                   _PR_MD_PR_POLL
+
+/* --- Scheduler stuff --- */
+#define _MD_PAUSE_CPU                   _PR_MD_PAUSE_CPU
+
+/* --- DIR stuff --- */
+#define PR_DIRECTORY_SEPARATOR        '\\'
+#define PR_DIRECTORY_SEPARATOR_STR    "\\"
+#define PR_PATH_SEPARATOR		';'
+#define PR_PATH_SEPARATOR_STR		";"
+#define _MD_ERRNO()                   GetLastError()
+#define _MD_OPEN_DIR                  _PR_MD_OPEN_DIR
+#define _MD_CLOSE_DIR                 _PR_MD_CLOSE_DIR
+#define _MD_READ_DIR                  _PR_MD_READ_DIR
+
+/* --- Segment stuff --- */
+#define _MD_INIT_SEGS()
+#define _MD_ALLOC_SEGMENT(seg, size, vaddr)   0
+#define _MD_FREE_SEGMENT(seg)
+
+/* --- Environment Stuff --- */
+#define _MD_GET_ENV                 _PR_MD_GET_ENV
+#define _MD_PUT_ENV                 _PR_MD_PUT_ENV
+
+/* --- Threading Stuff --- */
+#define _MD_DEFAULT_STACK_SIZE            0
+#define _MD_INIT_THREAD             _PR_MD_INIT_THREAD
+#define _MD_INIT_ATTACHED_THREAD    _PR_MD_INIT_THREAD
+#define _MD_CREATE_THREAD           _PR_MD_CREATE_THREAD
+#define _MD_JOIN_THREAD             _PR_MD_JOIN_THREAD
+#define _MD_END_THREAD              _PR_MD_END_THREAD
+#define _MD_YIELD                   _PR_MD_YIELD
+#define _MD_SET_PRIORITY            _PR_MD_SET_PRIORITY
+#define _MD_CLEAN_THREAD            _PR_MD_CLEAN_THREAD
+#define _MD_SETTHREADAFFINITYMASK   _PR_MD_SETTHREADAFFINITYMASK
+#define _MD_GETTHREADAFFINITYMASK   _PR_MD_GETTHREADAFFINITYMASK
+#define _MD_EXIT_THREAD             _PR_MD_EXIT_THREAD
+#define _MD_SUSPEND_THREAD          _PR_MD_SUSPEND_THREAD
+#define _MD_RESUME_THREAD           _PR_MD_RESUME_THREAD
+#define _MD_SUSPEND_CPU             _PR_MD_SUSPEND_CPU
+#define _MD_RESUME_CPU              _PR_MD_RESUME_CPU
+#define _MD_BEGIN_SUSPEND_ALL()
+#define _MD_BEGIN_RESUME_ALL()
+#define _MD_END_SUSPEND_ALL()
+#define _MD_END_RESUME_ALL()
+
+extern void _PR_Unblock_IO_Wait(PRThread *thr);
+
+/* --- Lock stuff --- */
+#define _MD_NEW_LOCK(lock)            (InitializeCriticalSection(&((lock)->mutex)),PR_SUCCESS)
+#define _MD_FREE_LOCK(lock)           DeleteCriticalSection(&((lock)->mutex))
+#ifndef PROFILE_LOCKS
+#define _MD_LOCK(lock)                EnterCriticalSection(&((lock)->mutex))
+#define _MD_TEST_AND_LOCK(lock)       (TryEnterCriticalSection(&((lock)->mutex))== FALSE)
+#define _MD_UNLOCK(lock)              LeaveCriticalSection(&((lock)->mutex))
+#else
+#define _MD_LOCK(lock)                 \
+    PR_BEGIN_MACRO \
+    BOOL rv = TryEnterCriticalSection(&((lock)->mutex)); \
+    if (rv == TRUE) { \
+        InterlockedIncrement(&((lock)->hitcount)); \
+    } else { \
+        InterlockedIncrement(&((lock)->misscount)); \
+        EnterCriticalSection(&((lock)->mutex)); \
+    } \
+    PR_END_MACRO
+#define _MD_TEST_AND_LOCK(lock)       0  /* XXXMB */
+#define _MD_UNLOCK(lock)              LeaveCriticalSection(&((lock)->mutex))
+#endif
+#define _PR_LOCK                      _MD_LOCK
+#define _PR_UNLOCK					  _MD_UNLOCK
+
+/* --- lock and cv waiting --- */
+#define _MD_WAIT                      _PR_MD_WAIT
+#define _MD_WAKEUP_WAITER             _PR_MD_WAKEUP_WAITER
+
+   /* XXXMB- the IOQ stuff is certainly not working correctly yet. */
+extern  struct _MDLock              _pr_ioq_lock;
+#define _MD_IOQ_LOCK()                _MD_LOCK(&_pr_ioq_lock)
+#define _MD_IOQ_UNLOCK()              _MD_UNLOCK(&_pr_ioq_lock)
+
+
+/* --- Initialization stuff --- */
+#define _MD_START_INTERRUPTS()
+#define _MD_STOP_INTERRUPTS()
+#define _MD_DISABLE_CLOCK_INTERRUPTS()
+#define _MD_ENABLE_CLOCK_INTERRUPTS()
+#define _MD_BLOCK_CLOCK_INTERRUPTS()
+#define _MD_UNBLOCK_CLOCK_INTERRUPTS()
+#define _MD_EARLY_INIT                _PR_MD_EARLY_INIT
+#define _MD_FINAL_INIT()
+#define _MD_INIT_CPUS()
+#define _MD_INIT_RUNNING_CPU(cpu)
+
+struct PRProcess;
+struct PRProcessAttr;
+
+/* --- Create a new process --- */
+#define _MD_CREATE_PROCESS _PR_CreateWindowsProcess
+extern struct PRProcess * _PR_CreateWindowsProcess(
+    const char *path,
+    char *const *argv,
+    char *const *envp,
+    const struct PRProcessAttr *attr
+);
+
+#define _MD_DETACH_PROCESS _PR_DetachWindowsProcess
+extern PRStatus _PR_DetachWindowsProcess(struct PRProcess *process);
+
+/* --- Wait for a child process to terminate --- */
+#define _MD_WAIT_PROCESS _PR_WaitWindowsProcess
+extern PRStatus _PR_WaitWindowsProcess(struct PRProcess *process, 
+    PRInt32 *exitCode);
+
+#define _MD_KILL_PROCESS _PR_KillWindowsProcess
+extern PRStatus _PR_KillWindowsProcess(struct PRProcess *process);
+
+/* --- User Threading stuff --- */
+#define HAVE_FIBERS
+#define _MD_CREATE_USER_THREAD            _PR_MD_CREATE_USER_THREAD
+#define _MD_CREATE_PRIMORDIAL_USER_THREAD _PR_MD_CREATE_PRIMORDIAL_USER_THREAD
+#define _MD_CLEANUP_BEFORE_EXIT           _PR_MD_CLEANUP_BEFORE_EXIT
+#define _MD_EXIT                          _PR_MD_EXIT
+#define _MD_INIT_CONTEXT                  _PR_MD_INIT_CONTEXT
+#define _MD_SWITCH_CONTEXT                _PR_MD_SWITCH_CONTEXT
+#define _MD_RESTORE_CONTEXT               _PR_MD_RESTORE_CONTEXT
+
+/* --- Intervals --- */
+#define _MD_INTERVAL_INIT                 _PR_MD_INTERVAL_INIT
+#define _MD_GET_INTERVAL                  _PR_MD_GET_INTERVAL
+#define _MD_INTERVAL_PER_SEC              _PR_MD_INTERVAL_PER_SEC
+#define _MD_INTERVAL_PER_MILLISEC()       (_PR_MD_INTERVAL_PER_SEC() / 1000)
+#define _MD_INTERVAL_PER_MICROSEC()       (_PR_MD_INTERVAL_PER_SEC() / 1000000)
+
+/* --- Time --- */
+extern void _PR_FileTimeToPRTime(const FILETIME *filetime, PRTime *prtm);
+
+/* --- Native-Thread Specific Definitions ------------------------------- */
+
+extern BOOL _pr_use_static_tls;
+
+extern __declspec(thread) struct PRThread *_pr_current_fiber;
+extern DWORD _pr_currentFiberIndex;
+
+#define _MD_GET_ATTACHED_THREAD() \
+    (_pr_use_static_tls ? _pr_current_fiber \
+    : (PRThread *) TlsGetValue(_pr_currentFiberIndex))
+
+extern struct PRThread * _MD_CURRENT_THREAD(void);
+
+#define _MD_SET_CURRENT_THREAD(_thread) \
+    PR_BEGIN_MACRO \
+        if (_pr_use_static_tls) { \
+            _pr_current_fiber = (_thread); \
+        } else { \
+            TlsSetValue(_pr_currentFiberIndex, (_thread)); \
+        } \
+    PR_END_MACRO
+
+extern __declspec(thread) struct PRThread *_pr_fiber_last_run;
+extern DWORD _pr_lastFiberIndex;
+
+#define _MD_LAST_THREAD() \
+    (_pr_use_static_tls ? _pr_fiber_last_run \
+    : (PRThread *) TlsGetValue(_pr_lastFiberIndex))
+
+#define _MD_SET_LAST_THREAD(_thread) \
+    PR_BEGIN_MACRO \
+        if (_pr_use_static_tls) { \
+            _pr_fiber_last_run = (_thread); \
+        } else { \
+            TlsSetValue(_pr_lastFiberIndex, (_thread)); \
+        } \
+    PR_END_MACRO
+
+extern __declspec(thread) struct _PRCPU *_pr_current_cpu;
+extern DWORD _pr_currentCPUIndex;
+
+#define _MD_CURRENT_CPU() \
+    (_pr_use_static_tls ? _pr_current_cpu \
+    : (struct _PRCPU *) TlsGetValue(_pr_currentCPUIndex))
+
+#define _MD_SET_CURRENT_CPU(_cpu) \
+    PR_BEGIN_MACRO \
+        if (_pr_use_static_tls) { \
+            _pr_current_cpu = (_cpu); \
+        } else { \
+            TlsSetValue(_pr_currentCPUIndex, (_cpu)); \
+        } \
+    PR_END_MACRO
+
+extern __declspec(thread) PRUintn _pr_ints_off;
+extern DWORD _pr_intsOffIndex;
+
+#define _MD_GET_INTSOFF() \
+    (_pr_use_static_tls ? _pr_ints_off \
+    : (PRUintn) TlsGetValue(_pr_intsOffIndex))
+
+#define _MD_SET_INTSOFF(_val) \
+    PR_BEGIN_MACRO \
+        if (_pr_use_static_tls) { \
+            _pr_ints_off = (_val); \
+        } else { \
+            TlsSetValue(_pr_intsOffIndex, (LPVOID) (_val)); \
+        } \
+    PR_END_MACRO
+
+/* --- Initialization stuff --- */
+#define _MD_INIT_LOCKS()
+
+/* --- Stack stuff --- */
+#define _MD_INIT_STACK(stack, redzone)
+#define _MD_CLEAR_STACK(stack)
+
+/* --- Memory-mapped files stuff --- */
+
+struct _MDFileMap {
+    HANDLE hFileMap;
+    DWORD dwAccess;
+};
+
+extern PRStatus _MD_CreateFileMap(struct PRFileMap *fmap, PRInt64 size);
+#define _MD_CREATE_FILE_MAP _MD_CreateFileMap
+
+extern PRInt32 _MD_GetMemMapAlignment(void);
+#define _MD_GET_MEM_MAP_ALIGNMENT _MD_GetMemMapAlignment
+
+extern void * _MD_MemMap(struct PRFileMap *fmap, PRInt64 offset,
+        PRUint32 len);
+#define _MD_MEM_MAP _MD_MemMap
+
+extern PRStatus _MD_MemUnmap(void *addr, PRUint32 size);
+#define _MD_MEM_UNMAP _MD_MemUnmap
+
+extern PRStatus _MD_CloseFileMap(struct PRFileMap *fmap);
+#define _MD_CLOSE_FILE_MAP _MD_CloseFileMap
+
+/* --- Named semaphores stuff --- */
+#define _PR_HAVE_NAMED_SEMAPHORES
+#define _MD_OPEN_SEMAPHORE            _PR_MD_OPEN_SEMAPHORE
+#define _MD_WAIT_SEMAPHORE            _PR_MD_WAIT_SEMAPHORE
+#define _MD_POST_SEMAPHORE            _PR_MD_POST_SEMAPHORE
+#define _MD_CLOSE_SEMAPHORE           _PR_MD_CLOSE_SEMAPHORE
+#define _MD_DELETE_SEMAPHORE(name)    PR_SUCCESS  /* no op */
+
+#endif /* nspr_win32_defs_h___ */