Index: third_party/sqlite/ext/fts2/fts2.c |
=================================================================== |
--- third_party/sqlite/ext/fts2/fts2.c (revision 27190) |
+++ third_party/sqlite/ext/fts2/fts2.c (working copy) |
@@ -447,30 +447,41 @@ |
/* Read a 64-bit variable-length integer from memory starting at p[0]. |
* Return the number of bytes read, or 0 on error. |
* The value is stored in *v. */ |
-static int getVarint(const char *p, sqlite_int64 *v){ |
+static int getVarintSafe(const char *p, sqlite_int64 *v, int max){ |
const unsigned char *q = (const unsigned char *) p; |
sqlite_uint64 x = 0, y = 1; |
- while( (*q & 0x80) == 0x80 ){ |
+ if( max>VARINT_MAX ) max = VARINT_MAX; |
+ while( max && (*q & 0x80) == 0x80 ){ |
+ max--; |
x += y * (*q++ & 0x7f); |
y <<= 7; |
- if( q - (unsigned char *)p >= VARINT_MAX ){ /* bad data */ |
- assert( 0 ); |
- return 0; |
- } |
} |
+ if ( !max ){ |
+ assert( 0 ); |
+ return 0; /* tried to read too much; bad data */ |
+ } |
x += y * (*q++); |
*v = (sqlite_int64) x; |
return (int) (q - (unsigned char *)p); |
} |
-static int getVarint32(const char *p, int *pi){ |
+static int getVarint(const char *p, sqlite_int64 *v){ |
+ return getVarintSafe(p, v, VARINT_MAX); |
+} |
+ |
+static int getVarint32Safe(const char *p, int *pi, int max){ |
sqlite_int64 i; |
- int ret = getVarint(p, &i); |
+ int ret = getVarintSafe(p, &i, max); |
+ if( !ret ) return ret; |
*pi = (int) i; |
assert( *pi==i ); |
return ret; |
} |
+static int getVarint32(const char* p, int *pi){ |
+ return getVarint32Safe(p, pi, VARINT_MAX); |
+} |
+ |
/*******************************************************************/ |
/* DataBuffer is used to collect data into a buffer in piecemeal |
** fashion. It implements the usual distinction between amount of |
@@ -639,7 +650,7 @@ |
static int dlrAtEnd(DLReader *pReader){ |
assert( pReader->nData>=0 ); |
- return pReader->nData==0; |
+ return pReader->nData<=0; |
} |
static sqlite_int64 dlrDocid(DLReader *pReader){ |
assert( !dlrAtEnd(pReader) ); |
@@ -663,7 +674,8 @@ |
*/ |
static const char *dlrPosData(DLReader *pReader){ |
sqlite_int64 iDummy; |
- int n = getVarint(pReader->pData, &iDummy); |
+ int n = getVarintSafe(pReader->pData, &iDummy, pReader->nElement); |
+ if( !n ) return NULL; |
assert( !dlrAtEnd(pReader) ); |
return pReader->pData+n; |
} |
@@ -673,7 +685,7 @@ |
assert( !dlrAtEnd(pReader) ); |
return pReader->nElement-n; |
} |
-static void dlrStep(DLReader *pReader){ |
+static int dlrStep(DLReader *pReader){ |
assert( !dlrAtEnd(pReader) ); |
/* Skip past current doclist element. */ |
@@ -682,32 +694,48 @@ |
pReader->nData -= pReader->nElement; |
/* If there is more data, read the next doclist element. */ |
- if( pReader->nData!=0 ){ |
+ if( pReader->nData>0 ){ |
sqlite_int64 iDocidDelta; |
- int iDummy, n = getVarint(pReader->pData, &iDocidDelta); |
+ int nTotal = 0; |
+ int iDummy, n = getVarintSafe(pReader->pData, &iDocidDelta, pReader->nData); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ nTotal += n; |
pReader->iDocid += iDocidDelta; |
if( pReader->iType>=DL_POSITIONS ){ |
- assert( n<pReader->nData ); |
while( 1 ){ |
- n += getVarint32(pReader->pData+n, &iDummy); |
- assert( n<=pReader->nData ); |
+ n = getVarint32Safe(pReader->pData+nTotal, &iDummy, |
+ pReader->nData-nTotal); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ nTotal += n; |
if( iDummy==POS_END ) break; |
if( iDummy==POS_COLUMN ){ |
- n += getVarint32(pReader->pData+n, &iDummy); |
- assert( n<pReader->nData ); |
+ n = getVarint32Safe(pReader->pData+nTotal, &iDummy, |
+ pReader->nData-nTotal); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ nTotal += n; |
}else if( pReader->iType==DL_POSITIONS_OFFSETS ){ |
- n += getVarint32(pReader->pData+n, &iDummy); |
- n += getVarint32(pReader->pData+n, &iDummy); |
- assert( n<pReader->nData ); |
+ n = getVarint32Safe(pReader->pData+nTotal, &iDummy, |
+ pReader->nData-nTotal); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ nTotal += n; |
+ n = getVarint32Safe(pReader->pData+nTotal, &iDummy, |
+ pReader->nData-nTotal); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ nTotal += n; |
} |
} |
} |
- pReader->nElement = n; |
+ pReader->nElement = nTotal; |
assert( pReader->nElement<=pReader->nData ); |
} |
+ return SQLITE_OK; |
} |
-static void dlrInit(DLReader *pReader, DocListType iType, |
- const char *pData, int nData){ |
+static void dlrDestroy(DLReader *pReader){ |
+ SCRAMBLE(pReader); |
+} |
+static int dlrInit(DLReader *pReader, DocListType iType, |
+ const char *pData, int nData){ |
+ int rc; |
assert( pData!=NULL && nData!=0 ); |
pReader->iType = iType; |
pReader->pData = pData; |
@@ -716,11 +744,10 @@ |
pReader->iDocid = 0; |
/* Load the first element's data. There must be a first element. */ |
- dlrStep(pReader); |
+ rc = dlrStep(pReader); |
+ if( rc!=SQLITE_OK ) dlrDestroy(pReader); |
+ return rc; |
} |
-static void dlrDestroy(DLReader *pReader){ |
- SCRAMBLE(pReader); |
-} |
#ifndef NDEBUG |
/* Verify that the doclist can be validly decoded. Also returns the |
@@ -806,9 +833,9 @@ |
/* TODO(shess) This has become just a helper for docListMerge. |
** Consider a refactor to make this cleaner. |
*/ |
-static void dlwAppend(DLWriter *pWriter, |
- const char *pData, int nData, |
- sqlite_int64 iFirstDocid, sqlite_int64 iLastDocid){ |
+static int dlwAppend(DLWriter *pWriter, |
+ const char *pData, int nData, |
+ sqlite_int64 iFirstDocid, sqlite_int64 iLastDocid){ |
sqlite_int64 iDocid = 0; |
char c[VARINT_MAX]; |
int nFirstOld, nFirstNew; /* Old and new varint len of first docid. */ |
@@ -817,7 +844,8 @@ |
#endif |
/* Recode the initial docid as delta from iPrevDocid. */ |
- nFirstOld = getVarint(pData, &iDocid); |
+ nFirstOld = getVarintSafe(pData, &iDocid, nData); |
+ if( !nFirstOld ) return SQLITE_CORRUPT_BKPT; |
assert( nFirstOld<nData || (nFirstOld==nData && pWriter->iType==DL_DOCIDS) ); |
nFirstNew = putVarint(c, iFirstDocid-pWriter->iPrevDocid); |
@@ -838,10 +866,11 @@ |
dataBufferAppend(pWriter->b, c, nFirstNew); |
} |
pWriter->iPrevDocid = iLastDocid; |
+ return SQLITE_OK; |
} |
-static void dlwCopy(DLWriter *pWriter, DLReader *pReader){ |
- dlwAppend(pWriter, dlrDocData(pReader), dlrDocDataBytes(pReader), |
- dlrDocid(pReader), dlrDocid(pReader)); |
+static int dlwCopy(DLWriter *pWriter, DLReader *pReader){ |
+ return dlwAppend(pWriter, dlrDocData(pReader), dlrDocDataBytes(pReader), |
+ dlrDocid(pReader), dlrDocid(pReader)); |
} |
static void dlwAdd(DLWriter *pWriter, sqlite_int64 iDocid){ |
char c[VARINT_MAX]; |
@@ -902,45 +931,63 @@ |
assert( !plrAtEnd(pReader) ); |
return pReader->iEndOffset; |
} |
-static void plrStep(PLReader *pReader){ |
- int i, n; |
+static int plrStep(PLReader *pReader){ |
+ int i, n, nTotal = 0; |
assert( !plrAtEnd(pReader) ); |
- if( pReader->nData==0 ){ |
+ if( pReader->nData<=0 ){ |
pReader->pData = NULL; |
- return; |
+ return SQLITE_OK; |
} |
- n = getVarint32(pReader->pData, &i); |
+ n = getVarint32Safe(pReader->pData, &i, pReader->nData); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ nTotal += n; |
if( i==POS_COLUMN ){ |
- n += getVarint32(pReader->pData+n, &pReader->iColumn); |
+ n = getVarint32Safe(pReader->pData+nTotal, &pReader->iColumn, |
+ pReader->nData-nTotal); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ nTotal += n; |
pReader->iPosition = 0; |
pReader->iStartOffset = 0; |
- n += getVarint32(pReader->pData+n, &i); |
+ n = getVarint32Safe(pReader->pData+nTotal, &i, pReader->nData-nTotal); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ nTotal += n; |
} |
/* Should never see adjacent column changes. */ |
assert( i!=POS_COLUMN ); |
if( i==POS_END ){ |
+ assert( nTotal<=pReader->nData ); |
pReader->nData = 0; |
pReader->pData = NULL; |
- return; |
+ return SQLITE_OK; |
} |
pReader->iPosition += i-POS_BASE; |
if( pReader->iType==DL_POSITIONS_OFFSETS ){ |
- n += getVarint32(pReader->pData+n, &i); |
+ n = getVarint32Safe(pReader->pData+nTotal, &i, pReader->nData-nTotal); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ nTotal += n; |
pReader->iStartOffset += i; |
- n += getVarint32(pReader->pData+n, &i); |
+ n = getVarint32Safe(pReader->pData+nTotal, &i, pReader->nData-nTotal); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ nTotal += n; |
pReader->iEndOffset = pReader->iStartOffset+i; |
} |
- assert( n<=pReader->nData ); |
- pReader->pData += n; |
- pReader->nData -= n; |
+ assert( nTotal<=pReader->nData ); |
+ pReader->pData += nTotal; |
+ pReader->nData -= nTotal; |
+ return SQLITE_OK; |
} |
-static void plrInit(PLReader *pReader, DLReader *pDLReader){ |
+static void plrDestroy(PLReader *pReader){ |
+ SCRAMBLE(pReader); |
+} |
+ |
+static int plrInit(PLReader *pReader, DLReader *pDLReader){ |
+ int rc; |
pReader->pData = dlrPosData(pDLReader); |
pReader->nData = dlrPosDataLen(pDLReader); |
pReader->iType = pDLReader->iType; |
@@ -948,11 +995,10 @@ |
pReader->iPosition = 0; |
pReader->iStartOffset = 0; |
pReader->iEndOffset = 0; |
- plrStep(pReader); |
+ rc = plrStep(pReader); |
+ if( rc!=SQLITE_OK ) plrDestroy(pReader); |
+ return rc; |
} |
-static void plrDestroy(PLReader *pReader){ |
- SCRAMBLE(pReader); |
-} |
/*******************************************************************/ |
/* PLWriter is used in constructing a document's position list. As a |
@@ -1137,14 +1183,16 @@ |
** deletion will be trimmed, and will thus not effect a deletion |
** during the merge. |
*/ |
-static void docListTrim(DocListType iType, const char *pData, int nData, |
- int iColumn, DocListType iOutType, DataBuffer *out){ |
+static int docListTrim(DocListType iType, const char *pData, int nData, |
+ int iColumn, DocListType iOutType, DataBuffer *out){ |
DLReader dlReader; |
DLWriter dlWriter; |
+ int rc; |
assert( iOutType<=iType ); |
- dlrInit(&dlReader, iType, pData, nData); |
+ rc = dlrInit(&dlReader, iType, pData, nData); |
+ if( rc!=SQLITE_OK ) return rc; |
dlwInit(&dlWriter, iOutType, out); |
while( !dlrAtEnd(&dlReader) ){ |
@@ -1152,7 +1200,8 @@ |
PLWriter plWriter; |
int match = 0; |
- plrInit(&plReader, &dlReader); |
+ rc = plrInit(&plReader, &dlReader); |
+ if( rc!=SQLITE_OK ) break; |
while( !plrAtEnd(&plReader) ){ |
if( iColumn==-1 || plrColumn(&plReader)==iColumn ){ |
@@ -1163,7 +1212,11 @@ |
plwAdd(&plWriter, plrColumn(&plReader), plrPosition(&plReader), |
plrStartOffset(&plReader), plrEndOffset(&plReader)); |
} |
- plrStep(&plReader); |
+ rc = plrStep(&plReader); |
+ if( rc!=SQLITE_OK ){ |
+ plrDestroy(&plReader); |
+ goto err; |
+ } |
} |
if( match ){ |
plwTerminate(&plWriter); |
@@ -1171,10 +1224,13 @@ |
} |
plrDestroy(&plReader); |
- dlrStep(&dlReader); |
+ rc = dlrStep(&dlReader); |
+ if( rc!=SQLITE_OK ) break; |
} |
+err: |
dlwDestroy(&dlWriter); |
dlrDestroy(&dlReader); |
+ return rc; |
} |
/* Used by docListMerge() to keep doclists in the ascending order by |
@@ -1231,19 +1287,20 @@ |
/* TODO(shess) nReaders must be <= MERGE_COUNT. This should probably |
** be fixed. |
*/ |
-static void docListMerge(DataBuffer *out, |
- DLReader *pReaders, int nReaders){ |
+static int docListMerge(DataBuffer *out, |
+ DLReader *pReaders, int nReaders){ |
OrderedDLReader readers[MERGE_COUNT]; |
DLWriter writer; |
int i, n; |
const char *pStart = 0; |
int nStart = 0; |
sqlite_int64 iFirstDocid = 0, iLastDocid = 0; |
+ int rc = SQLITE_OK; |
assert( nReaders>0 ); |
if( nReaders==1 ){ |
dataBufferAppend(out, dlrDocData(pReaders), dlrAllDataBytes(pReaders)); |
- return; |
+ return SQLITE_OK; |
} |
assert( nReaders<=MERGE_COUNT ); |
@@ -1276,20 +1333,23 @@ |
nStart += dlrDocDataBytes(readers[0].pReader); |
}else{ |
if( pStart!=0 ){ |
- dlwAppend(&writer, pStart, nStart, iFirstDocid, iLastDocid); |
+ rc = dlwAppend(&writer, pStart, nStart, iFirstDocid, iLastDocid); |
+ if( rc!=SQLITE_OK ) goto err; |
} |
pStart = dlrDocData(readers[0].pReader); |
nStart = dlrDocDataBytes(readers[0].pReader); |
iFirstDocid = iDocid; |
} |
iLastDocid = iDocid; |
- dlrStep(readers[0].pReader); |
+ rc = dlrStep(readers[0].pReader); |
+ if( rc!=SQLITE_OK ) goto err; |
/* Drop all of the older elements with the same docid. */ |
for(i=1; i<nReaders && |
!dlrAtEnd(readers[i].pReader) && |
dlrDocid(readers[i].pReader)==iDocid; i++){ |
- dlrStep(readers[i].pReader); |
+ rc = dlrStep(readers[i].pReader); |
+ if( rc!=SQLITE_OK ) goto err; |
} |
/* Get the readers back into order. */ |
@@ -1299,8 +1359,11 @@ |
} |
/* Copy over any remaining elements. */ |
- if( nStart>0 ) dlwAppend(&writer, pStart, nStart, iFirstDocid, iLastDocid); |
+ if( nStart>0 ) |
+ rc = dlwAppend(&writer, pStart, nStart, iFirstDocid, iLastDocid); |
+err: |
dlwDestroy(&writer); |
+ return rc; |
} |
/* Helper function for posListUnion(). Compares the current position |
@@ -1336,30 +1399,40 @@ |
** work with any doclist type, though both inputs and the output |
** should be the same type. |
*/ |
-static void posListUnion(DLReader *pLeft, DLReader *pRight, DLWriter *pOut){ |
+static int posListUnion(DLReader *pLeft, DLReader *pRight, DLWriter *pOut){ |
PLReader left, right; |
PLWriter writer; |
+ int rc; |
assert( dlrDocid(pLeft)==dlrDocid(pRight) ); |
assert( pLeft->iType==pRight->iType ); |
assert( pLeft->iType==pOut->iType ); |
- plrInit(&left, pLeft); |
- plrInit(&right, pRight); |
+ rc = plrInit(&left, pLeft); |
+ if( rc != SQLITE_OK ) return rc; |
+ rc = plrInit(&right, pRight); |
+ if( rc != SQLITE_OK ){ |
+ plrDestroy(&left); |
+ return rc; |
+ } |
plwInit(&writer, pOut, dlrDocid(pLeft)); |
while( !plrAtEnd(&left) || !plrAtEnd(&right) ){ |
int c = posListCmp(&left, &right); |
if( c<0 ){ |
plwCopy(&writer, &left); |
- plrStep(&left); |
+ rc = plrStep(&left); |
+ if( rc != SQLITE_OK ) break; |
}else if( c>0 ){ |
plwCopy(&writer, &right); |
- plrStep(&right); |
+ rc = plrStep(&right); |
+ if( rc != SQLITE_OK ) break; |
}else{ |
plwCopy(&writer, &left); |
- plrStep(&left); |
- plrStep(&right); |
+ rc = plrStep(&left); |
+ if( rc != SQLITE_OK ) break; |
+ rc = plrStep(&right); |
+ if( rc != SQLITE_OK ) break; |
} |
} |
@@ -1367,56 +1440,75 @@ |
plwDestroy(&writer); |
plrDestroy(&left); |
plrDestroy(&right); |
+ return rc; |
} |
/* Write the union of doclists in pLeft and pRight to pOut. For |
** docids in common between the inputs, the union of the position |
** lists is written. Inputs and outputs are always type DL_DEFAULT. |
*/ |
-static void docListUnion( |
+static int docListUnion( |
const char *pLeft, int nLeft, |
const char *pRight, int nRight, |
DataBuffer *pOut /* Write the combined doclist here */ |
){ |
DLReader left, right; |
DLWriter writer; |
+ int rc; |
if( nLeft==0 ){ |
if( nRight!=0) dataBufferAppend(pOut, pRight, nRight); |
- return; |
+ return SQLITE_OK; |
} |
if( nRight==0 ){ |
dataBufferAppend(pOut, pLeft, nLeft); |
- return; |
+ return SQLITE_OK; |
} |
- dlrInit(&left, DL_DEFAULT, pLeft, nLeft); |
- dlrInit(&right, DL_DEFAULT, pRight, nRight); |
+ rc = dlrInit(&left, DL_DEFAULT, pLeft, nLeft); |
+ if( rc!=SQLITE_OK ) return rc; |
+ rc = dlrInit(&right, DL_DEFAULT, pRight, nRight); |
+ if( rc!=SQLITE_OK ){ |
+ dlrDestroy(&left); |
+ return rc; |
+ } |
dlwInit(&writer, DL_DEFAULT, pOut); |
while( !dlrAtEnd(&left) || !dlrAtEnd(&right) ){ |
if( dlrAtEnd(&right) ){ |
- dlwCopy(&writer, &left); |
- dlrStep(&left); |
+ rc = dlwCopy(&writer, &left); |
+ if( rc!=SQLITE_OK ) break; |
+ rc = dlrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
}else if( dlrAtEnd(&left) ){ |
- dlwCopy(&writer, &right); |
- dlrStep(&right); |
+ rc = dlwCopy(&writer, &right); |
+ if( rc!=SQLITE_OK ) break; |
+ rc = dlrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
}else if( dlrDocid(&left)<dlrDocid(&right) ){ |
- dlwCopy(&writer, &left); |
- dlrStep(&left); |
+ rc = dlwCopy(&writer, &left); |
+ if( rc!=SQLITE_OK ) break; |
+ rc = dlrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
}else if( dlrDocid(&left)>dlrDocid(&right) ){ |
- dlwCopy(&writer, &right); |
- dlrStep(&right); |
+ rc = dlwCopy(&writer, &right); |
+ if( rc!=SQLITE_OK ) break; |
+ rc = dlrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
}else{ |
- posListUnion(&left, &right, &writer); |
- dlrStep(&left); |
- dlrStep(&right); |
+ rc = posListUnion(&left, &right, &writer); |
+ if( rc!=SQLITE_OK ) break; |
+ rc = dlrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
+ rc = dlrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
} |
} |
dlrDestroy(&left); |
dlrDestroy(&right); |
dlwDestroy(&writer); |
+ return rc; |
} |
/* pLeft and pRight are DLReaders positioned to the same docid. |
@@ -1431,35 +1523,47 @@ |
** include the positions from pRight that are one more than a |
** position in pLeft. In other words: pRight.iPos==pLeft.iPos+1. |
*/ |
-static void posListPhraseMerge(DLReader *pLeft, DLReader *pRight, |
- DLWriter *pOut){ |
+static int posListPhraseMerge(DLReader *pLeft, DLReader *pRight, |
+ DLWriter *pOut){ |
PLReader left, right; |
PLWriter writer; |
int match = 0; |
+ int rc; |
assert( dlrDocid(pLeft)==dlrDocid(pRight) ); |
assert( pOut->iType!=DL_POSITIONS_OFFSETS ); |
- plrInit(&left, pLeft); |
- plrInit(&right, pRight); |
+ rc = plrInit(&left, pLeft); |
+ if( rc!=SQLITE_OK ) return rc; |
+ rc = plrInit(&right, pRight); |
+ if( rc!=SQLITE_OK ){ |
+ plrDestroy(&left); |
+ return rc; |
+ } |
while( !plrAtEnd(&left) && !plrAtEnd(&right) ){ |
if( plrColumn(&left)<plrColumn(&right) ){ |
- plrStep(&left); |
+ rc = plrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
}else if( plrColumn(&left)>plrColumn(&right) ){ |
- plrStep(&right); |
+ rc = plrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
}else if( plrPosition(&left)+1<plrPosition(&right) ){ |
- plrStep(&left); |
+ rc = plrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
}else if( plrPosition(&left)+1>plrPosition(&right) ){ |
- plrStep(&right); |
+ rc = plrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
}else{ |
if( !match ){ |
plwInit(&writer, pOut, dlrDocid(pLeft)); |
match = 1; |
} |
plwAdd(&writer, plrColumn(&right), plrPosition(&right), 0, 0); |
- plrStep(&left); |
- plrStep(&right); |
+ rc = plrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
+ rc = plrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
} |
} |
@@ -1470,6 +1574,7 @@ |
plrDestroy(&left); |
plrDestroy(&right); |
+ return rc; |
} |
/* We have two doclists with positions: pLeft and pRight. |
@@ -1481,7 +1586,7 @@ |
** iType controls the type of data written to pOut. If iType is |
** DL_POSITIONS, the positions are those from pRight. |
*/ |
-static void docListPhraseMerge( |
+static int docListPhraseMerge( |
const char *pLeft, int nLeft, |
const char *pRight, int nRight, |
DocListType iType, |
@@ -1489,152 +1594,198 @@ |
){ |
DLReader left, right; |
DLWriter writer; |
+ int rc; |
- if( nLeft==0 || nRight==0 ) return; |
+ if( nLeft==0 || nRight==0 ) return SQLITE_OK; |
assert( iType!=DL_POSITIONS_OFFSETS ); |
- dlrInit(&left, DL_POSITIONS, pLeft, nLeft); |
- dlrInit(&right, DL_POSITIONS, pRight, nRight); |
+ rc = dlrInit(&left, DL_POSITIONS, pLeft, nLeft); |
+ if( rc!=SQLITE_OK ) return rc; |
+ rc = dlrInit(&right, DL_POSITIONS, pRight, nRight); |
+ if( rc!=SQLITE_OK ){ |
+ dlrDestroy(&left); |
+ return rc; |
+ } |
dlwInit(&writer, iType, pOut); |
while( !dlrAtEnd(&left) && !dlrAtEnd(&right) ){ |
if( dlrDocid(&left)<dlrDocid(&right) ){ |
- dlrStep(&left); |
+ rc = dlrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
}else if( dlrDocid(&right)<dlrDocid(&left) ){ |
- dlrStep(&right); |
+ rc = dlrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
}else{ |
- posListPhraseMerge(&left, &right, &writer); |
- dlrStep(&left); |
- dlrStep(&right); |
+ rc = posListPhraseMerge(&left, &right, &writer); |
+ if( rc!=SQLITE_OK ) break; |
+ rc = dlrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
+ rc = dlrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
} |
} |
dlrDestroy(&left); |
dlrDestroy(&right); |
dlwDestroy(&writer); |
+ return rc; |
} |
/* We have two DL_DOCIDS doclists: pLeft and pRight. |
** Write the intersection of these two doclists into pOut as a |
** DL_DOCIDS doclist. |
*/ |
-static void docListAndMerge( |
+static int docListAndMerge( |
const char *pLeft, int nLeft, |
const char *pRight, int nRight, |
DataBuffer *pOut /* Write the combined doclist here */ |
){ |
DLReader left, right; |
DLWriter writer; |
+ int rc; |
- if( nLeft==0 || nRight==0 ) return; |
+ if( nLeft==0 || nRight==0 ) return SQLITE_OK; |
- dlrInit(&left, DL_DOCIDS, pLeft, nLeft); |
- dlrInit(&right, DL_DOCIDS, pRight, nRight); |
+ rc = dlrInit(&left, DL_DOCIDS, pLeft, nLeft); |
+ if( rc!=SQLITE_OK ) return rc; |
+ rc = dlrInit(&right, DL_DOCIDS, pRight, nRight); |
+ if( rc!=SQLITE_OK ){ |
+ dlrDestroy(&left); |
+ return rc; |
+ } |
dlwInit(&writer, DL_DOCIDS, pOut); |
while( !dlrAtEnd(&left) && !dlrAtEnd(&right) ){ |
if( dlrDocid(&left)<dlrDocid(&right) ){ |
- dlrStep(&left); |
+ rc = dlrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
}else if( dlrDocid(&right)<dlrDocid(&left) ){ |
- dlrStep(&right); |
+ rc = dlrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
}else{ |
dlwAdd(&writer, dlrDocid(&left)); |
- dlrStep(&left); |
- dlrStep(&right); |
+ rc = dlrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
+ rc = dlrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
} |
} |
dlrDestroy(&left); |
dlrDestroy(&right); |
dlwDestroy(&writer); |
+ return rc; |
} |
/* We have two DL_DOCIDS doclists: pLeft and pRight. |
** Write the union of these two doclists into pOut as a |
** DL_DOCIDS doclist. |
*/ |
-static void docListOrMerge( |
+static int docListOrMerge( |
const char *pLeft, int nLeft, |
const char *pRight, int nRight, |
DataBuffer *pOut /* Write the combined doclist here */ |
){ |
DLReader left, right; |
DLWriter writer; |
+ int rc; |
if( nLeft==0 ){ |
if( nRight!=0 ) dataBufferAppend(pOut, pRight, nRight); |
- return; |
+ return SQLITE_OK; |
} |
if( nRight==0 ){ |
dataBufferAppend(pOut, pLeft, nLeft); |
- return; |
+ return SQLITE_OK; |
} |
- dlrInit(&left, DL_DOCIDS, pLeft, nLeft); |
- dlrInit(&right, DL_DOCIDS, pRight, nRight); |
+ rc = dlrInit(&left, DL_DOCIDS, pLeft, nLeft); |
+ if( rc!=SQLITE_OK ) return rc; |
+ rc = dlrInit(&right, DL_DOCIDS, pRight, nRight); |
+ if( rc!=SQLITE_OK ){ |
+ dlrDestroy(&left); |
+ return rc; |
+ } |
dlwInit(&writer, DL_DOCIDS, pOut); |
while( !dlrAtEnd(&left) || !dlrAtEnd(&right) ){ |
if( dlrAtEnd(&right) ){ |
dlwAdd(&writer, dlrDocid(&left)); |
- dlrStep(&left); |
+ rc = dlrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
}else if( dlrAtEnd(&left) ){ |
dlwAdd(&writer, dlrDocid(&right)); |
- dlrStep(&right); |
+ rc = dlrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
}else if( dlrDocid(&left)<dlrDocid(&right) ){ |
dlwAdd(&writer, dlrDocid(&left)); |
- dlrStep(&left); |
+ rc = dlrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
}else if( dlrDocid(&right)<dlrDocid(&left) ){ |
dlwAdd(&writer, dlrDocid(&right)); |
- dlrStep(&right); |
+ rc = dlrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
}else{ |
dlwAdd(&writer, dlrDocid(&left)); |
- dlrStep(&left); |
- dlrStep(&right); |
+ rc = dlrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
+ rc = dlrStep(&right); |
+ if( rc!=SQLITE_OK ) break; |
} |
} |
dlrDestroy(&left); |
dlrDestroy(&right); |
dlwDestroy(&writer); |
+ return rc; |
} |
/* We have two DL_DOCIDS doclists: pLeft and pRight. |
** Write into pOut as DL_DOCIDS doclist containing all documents that |
** occur in pLeft but not in pRight. |
*/ |
-static void docListExceptMerge( |
+static int docListExceptMerge( |
const char *pLeft, int nLeft, |
const char *pRight, int nRight, |
DataBuffer *pOut /* Write the combined doclist here */ |
){ |
DLReader left, right; |
DLWriter writer; |
+ int rc; |
- if( nLeft==0 ) return; |
+ if( nLeft==0 ) return SQLITE_OK; |
if( nRight==0 ){ |
dataBufferAppend(pOut, pLeft, nLeft); |
- return; |
+ return SQLITE_OK; |
} |
- dlrInit(&left, DL_DOCIDS, pLeft, nLeft); |
- dlrInit(&right, DL_DOCIDS, pRight, nRight); |
+ rc = dlrInit(&left, DL_DOCIDS, pLeft, nLeft); |
+ if( rc!=SQLITE_OK ) return rc; |
+ rc = dlrInit(&right, DL_DOCIDS, pRight, nRight); |
+ if( rc!=SQLITE_OK ){ |
+ dlrDestroy(&left); |
+ return rc; |
+ } |
dlwInit(&writer, DL_DOCIDS, pOut); |
while( !dlrAtEnd(&left) ){ |
while( !dlrAtEnd(&right) && dlrDocid(&right)<dlrDocid(&left) ){ |
- dlrStep(&right); |
+ rc = dlrStep(&right); |
+ if( rc!=SQLITE_OK ) goto err; |
} |
if( dlrAtEnd(&right) || dlrDocid(&left)<dlrDocid(&right) ){ |
dlwAdd(&writer, dlrDocid(&left)); |
} |
- dlrStep(&left); |
+ rc = dlrStep(&left); |
+ if( rc!=SQLITE_OK ) break; |
} |
+err: |
dlrDestroy(&left); |
dlrDestroy(&right); |
dlwDestroy(&writer); |
+ return rc; |
} |
static char *string_dup_n(const char *s, int n){ |
@@ -3437,8 +3588,9 @@ |
return SQLITE_OK; |
} |
rc = sqlite3_bind_int64(c->pStmt, 1, dlrDocid(&c->reader)); |
- dlrStep(&c->reader); |
if( rc!=SQLITE_OK ) return rc; |
+ rc = dlrStep(&c->reader); |
+ if( rc!=SQLITE_OK ) return rc; |
/* TODO(shess) Handle SQLITE_SCHEMA AND SQLITE_BUSY. */ |
rc = sqlite3_step(c->pStmt); |
if( rc==SQLITE_ROW ){ /* the case we expect */ |
@@ -3497,14 +3649,18 @@ |
return rc; |
} |
dataBufferInit(&new, 0); |
- docListPhraseMerge(left.pData, left.nData, right.pData, right.nData, |
- i<pQTerm->nPhrase ? DL_POSITIONS : DL_DOCIDS, &new); |
+ rc = docListPhraseMerge(left.pData, left.nData, right.pData, right.nData, |
+ i<pQTerm->nPhrase ? DL_POSITIONS : DL_DOCIDS, &new); |
dataBufferDestroy(&left); |
dataBufferDestroy(&right); |
+ if( rc!=SQLITE_OK ){ |
+ dataBufferDestroy(&new); |
+ return rc; |
+ } |
left = new; |
} |
*pResult = left; |
- return SQLITE_OK; |
+ return rc; |
} |
/* Add a new term pTerm[0..nTerm-1] to the query *q. |
@@ -3749,18 +3905,30 @@ |
return rc; |
} |
dataBufferInit(&new, 0); |
- docListOrMerge(right.pData, right.nData, or.pData, or.nData, &new); |
+ rc = docListOrMerge(right.pData, right.nData, or.pData, or.nData, &new); |
dataBufferDestroy(&right); |
dataBufferDestroy(&or); |
+ if( rc!=SQLITE_OK ){ |
+ if( i!=nNot ) dataBufferDestroy(&left); |
+ queryClear(pQuery); |
+ dataBufferDestroy(&new); |
+ return rc; |
+ } |
right = new; |
} |
if( i==nNot ){ /* first term processed. */ |
left = right; |
}else{ |
dataBufferInit(&new, 0); |
- docListAndMerge(left.pData, left.nData, right.pData, right.nData, &new); |
+ rc = docListAndMerge(left.pData, left.nData, |
+ right.pData, right.nData, &new); |
dataBufferDestroy(&right); |
dataBufferDestroy(&left); |
+ if( rc!=SQLITE_OK ){ |
+ queryClear(pQuery); |
+ dataBufferDestroy(&new); |
+ return rc; |
+ } |
left = new; |
} |
} |
@@ -3780,9 +3948,15 @@ |
return rc; |
} |
dataBufferInit(&new, 0); |
- docListExceptMerge(left.pData, left.nData, right.pData, right.nData, &new); |
+ rc = docListExceptMerge(left.pData, left.nData, |
+ right.pData, right.nData, &new); |
dataBufferDestroy(&right); |
dataBufferDestroy(&left); |
+ if( rc!=SQLITE_OK ){ |
+ queryClear(pQuery); |
+ dataBufferDestroy(&new); |
+ return rc; |
+ } |
left = new; |
} |
@@ -3876,7 +4050,8 @@ |
rc = fulltextQuery(v, idxNum-QUERY_FULLTEXT, zQuery, -1, &c->result, &c->q); |
if( rc!=SQLITE_OK ) return rc; |
if( c->result.nData!=0 ){ |
- dlrInit(&c->reader, DL_DOCIDS, c->result.pData, c->result.nData); |
+ rc = dlrInit(&c->reader, DL_DOCIDS, c->result.pData, c->result.nData); |
+ if( rc!=SQLITE_OK ) return rc; |
} |
break; |
} |
@@ -4377,22 +4552,19 @@ |
SCRAMBLE(pReader); |
} |
-/* TODO(shess) The assertions are great, but what if we're in NDEBUG |
-** and the blob is empty or otherwise contains suspect data? |
-*/ |
-static void interiorReaderInit(const char *pData, int nData, |
- InteriorReader *pReader){ |
+static int interiorReaderInit(const char *pData, int nData, |
+ InteriorReader *pReader){ |
int n, nTerm; |
- /* Require at least the leading flag byte */ |
+ /* These conditions are checked and met by the callers. */ |
assert( nData>0 ); |
assert( pData[0]!='\0' ); |
CLEAR(pReader); |
/* Decode the base blockid, and set the cursor to the first term. */ |
- n = getVarint(pData+1, &pReader->iBlockid); |
- assert( 1+n<=nData ); |
+ n = getVarintSafe(pData+1, &pReader->iBlockid, nData-1); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
pReader->pData = pData+1+n; |
pReader->nData = nData-(1+n); |
@@ -4403,17 +4575,18 @@ |
if( pReader->nData==0 ){ |
dataBufferInit(&pReader->term, 0); |
}else{ |
- n = getVarint32(pReader->pData, &nTerm); |
+ n = getVarint32Safe(pReader->pData, &nTerm, pReader->nData); |
+ if( !n || nTerm<0 || nTerm>pReader->nData-n) return SQLITE_CORRUPT_BKPT; |
dataBufferInit(&pReader->term, nTerm); |
dataBufferReplace(&pReader->term, pReader->pData+n, nTerm); |
- assert( n+nTerm<=pReader->nData ); |
pReader->pData += n+nTerm; |
pReader->nData -= n+nTerm; |
} |
+ return SQLITE_OK; |
} |
static int interiorReaderAtEnd(InteriorReader *pReader){ |
- return pReader->term.nData==0; |
+ return pReader->term.nData<=0; |
} |
static sqlite_int64 interiorReaderCurrentBlockid(InteriorReader *pReader){ |
@@ -4430,7 +4603,7 @@ |
} |
/* Step forward to the next term in the node. */ |
-static void interiorReaderStep(InteriorReader *pReader){ |
+static int interiorReaderStep(InteriorReader *pReader){ |
assert( !interiorReaderAtEnd(pReader) ); |
/* If the last term has been read, signal eof, else construct the |
@@ -4441,18 +4614,26 @@ |
}else{ |
int n, nPrefix, nSuffix; |
- n = getVarint32(pReader->pData, &nPrefix); |
- n += getVarint32(pReader->pData+n, &nSuffix); |
+ n = getVarint32Safe(pReader->pData, &nPrefix, pReader->nData); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ pReader->nData -= n; |
+ pReader->pData += n; |
+ n = getVarint32Safe(pReader->pData, &nSuffix, pReader->nData); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ pReader->nData -= n; |
+ pReader->pData += n; |
+ if( nSuffix<0 || nSuffix>pReader->nData ) return SQLITE_CORRUPT_BKPT; |
+ if( nPrefix<0 || nPrefix>pReader->term.nData ) return SQLITE_CORRUPT_BKPT; |
/* Truncate the current term and append suffix data. */ |
pReader->term.nData = nPrefix; |
- dataBufferAppend(&pReader->term, pReader->pData+n, nSuffix); |
+ dataBufferAppend(&pReader->term, pReader->pData, nSuffix); |
- assert( n+nSuffix<=pReader->nData ); |
- pReader->pData += n+nSuffix; |
- pReader->nData -= n+nSuffix; |
+ pReader->pData += nSuffix; |
+ pReader->nData -= nSuffix; |
} |
pReader->iBlockid++; |
+ return SQLITE_OK; |
} |
/* Compare the current term to pTerm[nTerm], returning strcmp-style |
@@ -4824,7 +5005,8 @@ |
n = putVarint(c, nData); |
dataBufferAppend(&pWriter->data, c, n); |
- docListMerge(&pWriter->data, pReaders, nReaders); |
+ rc = docListMerge(&pWriter->data, pReaders, nReaders); |
+ if( rc!= SQLITE_OK ) return rc; |
ASSERT_VALID_DOCLIST(DL_DEFAULT, |
pWriter->data.pData+iDoclistData+n, |
pWriter->data.nData-iDoclistData-n, NULL); |
@@ -4934,7 +5116,8 @@ |
int rc; |
DLReader reader; |
- dlrInit(&reader, DL_DEFAULT, pData, nData); |
+ rc = dlrInit(&reader, DL_DEFAULT, pData, nData); |
+ if( rc!=SQLITE_OK ) return rc; |
rc = leafWriterStepMerge(v, pWriter, pTerm, nTerm, &reader, 1); |
dlrDestroy(&reader); |
@@ -4979,38 +5162,40 @@ |
static const char *leafReaderData(LeafReader *pReader){ |
int n, nData; |
assert( pReader->term.nData>0 ); |
- n = getVarint32(pReader->pData, &nData); |
+ n = getVarint32Safe(pReader->pData, &nData, pReader->nData); |
+ if( !n || nData>pReader->nData-n ) return NULL; |
return pReader->pData+n; |
} |
-static void leafReaderInit(const char *pData, int nData, |
- LeafReader *pReader){ |
+static int leafReaderInit(const char *pData, int nData, LeafReader *pReader){ |
int nTerm, n; |
+ /* All callers check this precondition. */ |
assert( nData>0 ); |
assert( pData[0]=='\0' ); |
CLEAR(pReader); |
/* Read the first term, skipping the header byte. */ |
- n = getVarint32(pData+1, &nTerm); |
+ n = getVarint32Safe(pData+1, &nTerm, nData-1); |
+ if( !n || nTerm<0 || nTerm>nData-1-n ) return SQLITE_CORRUPT_BKPT; |
dataBufferInit(&pReader->term, nTerm); |
dataBufferReplace(&pReader->term, pData+1+n, nTerm); |
/* Position after the first term. */ |
- assert( 1+n+nTerm<nData ); |
pReader->pData = pData+1+n+nTerm; |
pReader->nData = nData-1-n-nTerm; |
+ return SQLITE_OK; |
} |
/* Step the reader forward to the next term. */ |
-static void leafReaderStep(LeafReader *pReader){ |
+static int leafReaderStep(LeafReader *pReader){ |
int n, nData, nPrefix, nSuffix; |
assert( !leafReaderAtEnd(pReader) ); |
/* Skip previous entry's data block. */ |
- n = getVarint32(pReader->pData, &nData); |
- assert( n+nData<=pReader->nData ); |
+ n = getVarint32Safe(pReader->pData, &nData, pReader->nData); |
+ if( !n || nData<0 || nData>pReader->nData-n ) return SQLITE_CORRUPT_BKPT; |
pReader->pData += n+nData; |
pReader->nData -= n+nData; |
@@ -5018,15 +5203,23 @@ |
/* Construct the new term using a prefix from the old term plus a |
** suffix from the leaf data. |
*/ |
- n = getVarint32(pReader->pData, &nPrefix); |
- n += getVarint32(pReader->pData+n, &nSuffix); |
- assert( n+nSuffix<pReader->nData ); |
+ n = getVarint32Safe(pReader->pData, &nPrefix, pReader->nData); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ pReader->nData -= n; |
+ pReader->pData += n; |
+ n = getVarint32Safe(pReader->pData, &nSuffix, pReader->nData); |
+ if( !n ) return SQLITE_CORRUPT_BKPT; |
+ pReader->nData -= n; |
+ pReader->pData += n; |
+ if( nSuffix<0 || nSuffix>pReader->nData ) return SQLITE_CORRUPT_BKPT; |
+ if( nPrefix<0 || nPrefix>pReader->term.nData ) return SQLITE_CORRUPT_BKPT; |
pReader->term.nData = nPrefix; |
- dataBufferAppend(&pReader->term, pReader->pData+n, nSuffix); |
+ dataBufferAppend(&pReader->term, pReader->pData, nSuffix); |
- pReader->pData += n+nSuffix; |
- pReader->nData -= n+nSuffix; |
+ pReader->pData += nSuffix; |
+ pReader->nData -= nSuffix; |
} |
+ return SQLITE_OK; |
} |
/* strcmp-style comparison of pReader's current term against pTerm. |
@@ -5133,14 +5326,19 @@ |
dataBufferInit(&pReader->rootData, 0); |
if( iStartBlockid==0 ){ |
+ int rc; |
/* Corrupt if this can't be a leaf node. */ |
if( pRootData==NULL || nRootData<1 || pRootData[0]!='\0' ){ |
return SQLITE_CORRUPT_BKPT; |
} |
/* Entire leaf level fit in root data. */ |
dataBufferReplace(&pReader->rootData, pRootData, nRootData); |
- leafReaderInit(pReader->rootData.pData, pReader->rootData.nData, |
- &pReader->leafReader); |
+ rc = leafReaderInit(pReader->rootData.pData, pReader->rootData.nData, |
+ &pReader->leafReader); |
+ if( rc!=SQLITE_OK ){ |
+ dataBufferDestroy(&pReader->rootData); |
+ return rc; |
+ } |
}else{ |
sqlite3_stmt *s; |
int rc = sql_get_leaf_statement(v, idx, &s); |
@@ -5174,7 +5372,7 @@ |
if( pLeafData==NULL || nLeafData<1 || pLeafData[0]!='\0' ){ |
rc = SQLITE_CORRUPT_BKPT; |
}else{ |
- leafReaderInit(pLeafData, nLeafData, &pReader->leafReader); |
+ rc = leafReaderInit(pLeafData, nLeafData, &pReader->leafReader); |
} |
} |
@@ -5197,11 +5395,12 @@ |
** end of the current leaf, step forward to the next leaf block. |
*/ |
static int leavesReaderStep(fulltext_vtab *v, LeavesReader *pReader){ |
+ int rc; |
assert( !leavesReaderAtEnd(pReader) ); |
- leafReaderStep(&pReader->leafReader); |
+ rc = leafReaderStep(&pReader->leafReader); |
+ if( rc!=SQLITE_OK ) return rc; |
if( leafReaderAtEnd(&pReader->leafReader) ){ |
- int rc; |
if( pReader->rootData.pData ){ |
pReader->eof = 1; |
return SQLITE_OK; |
@@ -5216,6 +5415,7 @@ |
if( sqlite3_column_type(pReader->pStmt, 0)!=SQLITE_BLOB ){ |
return SQLITE_CORRUPT_BKPT; |
}else{ |
+ LeafReader tmp; |
const char *pLeafData = sqlite3_column_blob(pReader->pStmt, 0); |
int nLeafData = sqlite3_column_bytes(pReader->pStmt, 0); |
@@ -5224,8 +5424,10 @@ |
return SQLITE_CORRUPT_BKPT; |
} |
+ rc = leafReaderInit(pLeafData, nLeafData, &tmp); |
+ if( rc!=SQLITE_OK ) return rc; |
leafReaderDestroy(&pReader->leafReader); |
- leafReaderInit(pLeafData, nLeafData, &pReader->leafReader); |
+ pReader->leafReader = tmp; |
} |
} |
return SQLITE_OK; |
@@ -5334,14 +5536,27 @@ |
DLReader dlReaders[MERGE_COUNT]; |
const char *pTerm = leavesReaderTerm(pReaders); |
int i, nTerm = leavesReaderTermBytes(pReaders); |
+ int rc; |
assert( nReaders<=MERGE_COUNT ); |
for(i=0; i<nReaders; i++){ |
- dlrInit(&dlReaders[i], DL_DEFAULT, |
- leavesReaderData(pReaders+i), |
- leavesReaderDataBytes(pReaders+i)); |
+ const char *pData = leavesReaderData(pReaders+i); |
+ if( pData==NULL ){ |
+ rc = SQLITE_CORRUPT_BKPT; |
+ break; |
+ } |
+ rc = dlrInit(&dlReaders[i], DL_DEFAULT, |
+ pData, |
+ leavesReaderDataBytes(pReaders+i)); |
+ if( rc!=SQLITE_OK ) break; |
} |
+ if( rc!=SQLITE_OK ){ |
+ while( i-->0 ){ |
+ dlrDestroy(&dlReaders[i]); |
+ } |
+ return rc; |
+ } |
return leafWriterStepMerge(v, pWriter, pTerm, nTerm, dlReaders, nReaders); |
} |
@@ -5444,12 +5659,14 @@ |
} |
/* Accumulate the union of *acc and *pData into *acc. */ |
-static void docListAccumulateUnion(DataBuffer *acc, |
- const char *pData, int nData) { |
+static int docListAccumulateUnion(DataBuffer *acc, |
+ const char *pData, int nData) { |
DataBuffer tmp = *acc; |
+ int rc; |
dataBufferInit(acc, tmp.nData+nData); |
- docListUnion(tmp.pData, tmp.nData, pData, nData, acc); |
+ rc = docListUnion(tmp.pData, tmp.nData, pData, nData, acc); |
dataBufferDestroy(&tmp); |
+ return rc; |
} |
/* TODO(shess) It might be interesting to explore different merge |
@@ -5491,8 +5708,13 @@ |
int c = leafReaderTermCmp(&pReader->leafReader, pTerm, nTerm, isPrefix); |
if( c>0 ) break; /* Past any possible matches. */ |
if( c==0 ){ |
+ int iBuffer, nData; |
const char *pData = leavesReaderData(pReader); |
- int iBuffer, nData = leavesReaderDataBytes(pReader); |
+ if( pData==NULL ){ |
+ rc = SQLITE_CORRUPT_BKPT; |
+ break; |
+ } |
+ nData = leavesReaderDataBytes(pReader); |
/* Find the first empty buffer. */ |
for(iBuffer=0; iBuffer<nBuffers; ++iBuffer){ |
@@ -5538,11 +5760,13 @@ |
** with pData/nData. |
*/ |
dataBufferSwap(p, pAcc); |
- docListAccumulateUnion(pAcc, pData, nData); |
+ rc = docListAccumulateUnion(pAcc, pData, nData); |
+ if( rc!=SQLITE_OK ) goto err; |
/* Accumulate remaining doclists into pAcc. */ |
for(++p; p<pAcc; ++p){ |
- docListAccumulateUnion(pAcc, p->pData, p->nData); |
+ rc = docListAccumulateUnion(pAcc, p->pData, p->nData); |
+ if( rc!=SQLITE_OK ) goto err; |
/* dataBufferReset() could allow a large doclist to blow up |
** our memory requirements. |
@@ -5567,13 +5791,15 @@ |
if( out->nData==0 ){ |
dataBufferSwap(out, &(pBuffers[iBuffer])); |
}else{ |
- docListAccumulateUnion(out, pBuffers[iBuffer].pData, |
- pBuffers[iBuffer].nData); |
+ rc = docListAccumulateUnion(out, pBuffers[iBuffer].pData, |
+ pBuffers[iBuffer].nData); |
+ if( rc!=SQLITE_OK ) break; |
} |
} |
} |
} |
+err: |
while( nBuffers-- ){ |
dataBufferDestroy(&(pBuffers[nBuffers])); |
} |
@@ -5632,20 +5858,26 @@ |
** node. Consider whether breaking symmetry is worthwhile. I suspect |
** it is not worthwhile. |
*/ |
-static void getChildrenContaining(const char *pData, int nData, |
- const char *pTerm, int nTerm, int isPrefix, |
- sqlite_int64 *piStartChild, |
- sqlite_int64 *piEndChild){ |
+static int getChildrenContaining(const char *pData, int nData, |
+ const char *pTerm, int nTerm, int isPrefix, |
+ sqlite_int64 *piStartChild, |
+ sqlite_int64 *piEndChild){ |
InteriorReader reader; |
+ int rc; |
assert( nData>1 ); |
assert( *pData!='\0' ); |
- interiorReaderInit(pData, nData, &reader); |
+ rc = interiorReaderInit(pData, nData, &reader); |
+ if( rc!=SQLITE_OK ) return rc; |
/* Scan for the first child which could contain pTerm/nTerm. */ |
while( !interiorReaderAtEnd(&reader) ){ |
if( interiorReaderTermCmp(&reader, pTerm, nTerm, 0)>0 ) break; |
- interiorReaderStep(&reader); |
+ rc = interiorReaderStep(&reader); |
+ if( rc!=SQLITE_OK ){ |
+ interiorReaderDestroy(&reader); |
+ return rc; |
+ } |
} |
*piStartChild = interiorReaderCurrentBlockid(&reader); |
@@ -5655,7 +5887,11 @@ |
*/ |
while( !interiorReaderAtEnd(&reader) ){ |
if( interiorReaderTermCmp(&reader, pTerm, nTerm, isPrefix)>0 ) break; |
- interiorReaderStep(&reader); |
+ rc = interiorReaderStep(&reader); |
+ if( rc!=SQLITE_OK ){ |
+ interiorReaderDestroy(&reader); |
+ return rc; |
+ } |
} |
*piEndChild = interiorReaderCurrentBlockid(&reader); |
@@ -5664,6 +5900,7 @@ |
/* Children must ascend, and if !prefix, both must be the same. */ |
assert( *piEndChild>=*piStartChild ); |
assert( isPrefix || *piStartChild==*piEndChild ); |
+ return rc; |
} |
/* Read block at iBlockid and pass it with other params to |
@@ -5709,8 +5946,12 @@ |
return SQLITE_CORRUPT_BKPT; |
} |
- getChildrenContaining(pData, nData, pTerm, nTerm, |
- isPrefix, piStartChild, piEndChild); |
+ rc = getChildrenContaining(pData, nData, pTerm, nTerm, |
+ isPrefix, piStartChild, piEndChild); |
+ if( rc!=SQLITE_OK ){ |
+ sqlite3_reset(s); |
+ return rc; |
+ } |
} |
/* We expect only one row. We must execute another sqlite3_step() |
@@ -5741,8 +5982,9 @@ |
/* Process pData as an interior node, then loop down the tree |
** until we find the set of leaf nodes to scan for the term. |
*/ |
- getChildrenContaining(pData, nData, pTerm, nTerm, isPrefix, |
- &iStartChild, &iEndChild); |
+ rc = getChildrenContaining(pData, nData, pTerm, nTerm, isPrefix, |
+ &iStartChild, &iEndChild); |
+ if( rc!=SQLITE_OK ) return rc; |
while( iStartChild>iLeavesEnd ){ |
sqlite_int64 iNextStart, iNextEnd; |
rc = loadAndGetChildrenContaining(v, iStartChild, pTerm, nTerm, isPrefix, |
@@ -5812,16 +6054,21 @@ |
DataBuffer merged; |
DLReader readers[2]; |
- dlrInit(&readers[0], DL_DEFAULT, out->pData, out->nData); |
- dlrInit(&readers[1], DL_DEFAULT, result.pData, result.nData); |
- dataBufferInit(&merged, out->nData+result.nData); |
- docListMerge(&merged, readers, 2); |
- dataBufferDestroy(out); |
- *out = merged; |
- dlrDestroy(&readers[0]); |
- dlrDestroy(&readers[1]); |
+ rc = dlrInit(&readers[0], DL_DEFAULT, out->pData, out->nData); |
+ if( rc==SQLITE_OK ){ |
+ rc = dlrInit(&readers[1], DL_DEFAULT, result.pData, result.nData); |
+ if( rc==SQLITE_OK ){ |
+ dataBufferInit(&merged, out->nData+result.nData); |
+ rc = docListMerge(&merged, readers, 2); |
+ dataBufferDestroy(out); |
+ *out = merged; |
+ dlrDestroy(&readers[1]); |
+ } |
+ dlrDestroy(&readers[0]); |
+ } |
} |
} |
+ |
dataBufferDestroy(&result); |
return rc; |
} |
@@ -5862,6 +6109,7 @@ |
if( rc!=SQLITE_OK ) goto err; |
} |
if( rc==SQLITE_DONE ){ |
+ rc = SQLITE_OK; |
if( doclist.nData!=0 ){ |
/* TODO(shess) The old term_select_all() code applied the column |
** restrict as we merged segments, leading to smaller buffers. |
@@ -5869,10 +6117,9 @@ |
** system is checked in. |
*/ |
if( iColumn==v->nColumn) iColumn = -1; |
- docListTrim(DL_DEFAULT, doclist.pData, doclist.nData, |
- iColumn, iType, out); |
+ rc = docListTrim(DL_DEFAULT, doclist.pData, doclist.nData, |
+ iColumn, iType, out); |
} |
- rc = SQLITE_OK; |
} |
err: |
@@ -6218,6 +6465,7 @@ |
LeafWriter *pWriter){ |
int i, rc = SQLITE_OK; |
DataBuffer doclist, merged, tmp; |
+ const char *pData; |
/* Order the readers. */ |
i = nReaders; |
@@ -6238,14 +6486,21 @@ |
if( 0!=optLeavesReaderTermCmp(&readers[0], &readers[i]) ) break; |
} |
+ pData = optLeavesReaderData(&readers[0]); |
+ if( pData==NULL ){ |
+ rc = SQLITE_CORRUPT_BKPT; |
+ break; |
+ } |
+ |
/* Special-case for no merge. */ |
if( i==1 ){ |
/* Trim deletions from the doclist. */ |
dataBufferReset(&merged); |
- docListTrim(DL_DEFAULT, |
- optLeavesReaderData(&readers[0]), |
- optLeavesReaderDataBytes(&readers[0]), |
- -1, DL_DEFAULT, &merged); |
+ rc = docListTrim(DL_DEFAULT, |
+ pData, |
+ optLeavesReaderDataBytes(&readers[0]), |
+ -1, DL_DEFAULT, &merged); |
+ if( rc!= SQLITE_OK ) break; |
}else{ |
DLReader dlReaders[MERGE_COUNT]; |
int iReader, nReaders; |
@@ -6253,9 +6508,10 @@ |
/* Prime the pipeline with the first reader's doclist. After |
** one pass index 0 will reference the accumulated doclist. |
*/ |
- dlrInit(&dlReaders[0], DL_DEFAULT, |
- optLeavesReaderData(&readers[0]), |
- optLeavesReaderDataBytes(&readers[0])); |
+ rc = dlrInit(&dlReaders[0], DL_DEFAULT, |
+ pData, |
+ optLeavesReaderDataBytes(&readers[0])); |
+ if( rc!=SQLITE_OK ) break; |
iReader = 1; |
assert( iReader<i ); /* Must execute the loop at least once. */ |
@@ -6263,24 +6519,35 @@ |
/* Merge 16 inputs per pass. */ |
for( nReaders=1; iReader<i && nReaders<MERGE_COUNT; |
iReader++, nReaders++ ){ |
- dlrInit(&dlReaders[nReaders], DL_DEFAULT, |
- optLeavesReaderData(&readers[iReader]), |
- optLeavesReaderDataBytes(&readers[iReader])); |
+ pData = optLeavesReaderData(&readers[iReader]); |
+ if( pData == NULL ){ |
+ rc = SQLITE_CORRUPT_BKPT; |
+ break; |
+ } |
+ rc = dlrInit(&dlReaders[nReaders], DL_DEFAULT, |
+ pData, |
+ optLeavesReaderDataBytes(&readers[iReader])); |
+ if( rc != SQLITE_OK ) break; |
} |
/* Merge doclists and swap result into accumulator. */ |
- dataBufferReset(&merged); |
- docListMerge(&merged, dlReaders, nReaders); |
- tmp = merged; |
- merged = doclist; |
- doclist = tmp; |
+ if( rc==SQLITE_OK ){ |
+ dataBufferReset(&merged); |
+ rc = docListMerge(&merged, dlReaders, nReaders); |
+ tmp = merged; |
+ merged = doclist; |
+ doclist = tmp; |
+ } |
while( nReaders-- > 0 ){ |
dlrDestroy(&dlReaders[nReaders]); |
} |
+ if( rc!=SQLITE_OK ) goto err; |
+ |
/* Accumulated doclist to reader 0 for next pass. */ |
- dlrInit(&dlReaders[0], DL_DEFAULT, doclist.pData, doclist.nData); |
+ rc = dlrInit(&dlReaders[0], DL_DEFAULT, doclist.pData, doclist.nData); |
+ if( rc!=SQLITE_OK ) goto err; |
} |
/* Destroy reader that was left in the pipeline. */ |
@@ -6288,8 +6555,9 @@ |
/* Trim deletions from the doclist. */ |
dataBufferReset(&merged); |
- docListTrim(DL_DEFAULT, doclist.pData, doclist.nData, |
- -1, DL_DEFAULT, &merged); |
+ rc = docListTrim(DL_DEFAULT, doclist.pData, doclist.nData, |
+ -1, DL_DEFAULT, &merged); |
+ if( rc!=SQLITE_OK ) goto err; |
} |
/* Only pass doclists with hits (skip if all hits deleted). */ |
@@ -6628,16 +6896,19 @@ |
const char *pData, int nData){ |
DataBuffer dump; |
DLReader dlReader; |
+ int rc; |
assert( pData!=NULL && nData>0 ); |
+ rc = dlrInit(&dlReader, DL_DEFAULT, pData, nData); |
+ if( rc!=SQLITE_OK ) return rc; |
dataBufferInit(&dump, 0); |
- dlrInit(&dlReader, DL_DEFAULT, pData, nData); |
- for( ; !dlrAtEnd(&dlReader); dlrStep(&dlReader) ){ |
+ for( ; rc==SQLITE_OK && !dlrAtEnd(&dlReader); rc = dlrStep(&dlReader) ){ |
char buf[256]; |
PLReader plReader; |
- plrInit(&plReader, &dlReader); |
+ rc = plrInit(&plReader, &dlReader); |
+ if( rc!=SQLITE_OK ) break; |
if( DL_DEFAULT==DL_DOCIDS || plrAtEnd(&plReader) ){ |
sqlite3_snprintf(sizeof(buf), buf, "[%lld] ", dlrDocid(&dlReader)); |
dataBufferAppend(&dump, buf, strlen(buf)); |
@@ -6648,7 +6919,8 @@ |
dlrDocid(&dlReader), iColumn); |
dataBufferAppend(&dump, buf, strlen(buf)); |
- for( ; !plrAtEnd(&plReader); plrStep(&plReader) ){ |
+ for( ; !plrAtEnd(&plReader); rc = plrStep(&plReader) ){ |
+ if( rc!=SQLITE_OK ) break; |
if( plrColumn(&plReader)!=iColumn ){ |
iColumn = plrColumn(&plReader); |
sqlite3_snprintf(sizeof(buf), buf, "] %d[", iColumn); |
@@ -6669,6 +6941,7 @@ |
dataBufferAppend(&dump, buf, strlen(buf)); |
} |
plrDestroy(&plReader); |
+ if( rc!= SQLITE_OK ) break; |
assert( dump.nData>0 ); |
dump.nData--; /* Overwrite trailing space. */ |
@@ -6677,6 +6950,10 @@ |
} |
} |
dlrDestroy(&dlReader); |
+ if( rc!=SQLITE_OK ){ |
+ dataBufferDestroy(&dump); |
+ return rc; |
+ } |
assert( dump.nData>0 ); |
dump.nData--; /* Overwrite trailing space. */ |
@@ -6688,6 +6965,7 @@ |
sqlite3_result_text(pContext, dump.pData, dump.nData, sqlite3_free); |
dump.pData = NULL; |
dump.nData = dump.nCapacity = 0; |
+ return SQLITE_OK; |
} |
/* Implements dump_doclist() for use in inspecting the fts2 index from |