Get the latest ParseFTPList code from Mozilla, and apply only the absolutely

net/third_party/parseftp/ParseFTPList.h

Index: net/third_party/parseftp/ParseFTPList.h
diff --git a/net/third_party/parseftp/ParseFTPList.h b/net/third_party/parseftp/ParseFTPList.h
index 341e517e73b8283d5b6245ff03201ba79ed93570..b11abdcd9f1f61a365db4b49aa301d8f0c417405 100644
--- a/net/third_party/parseftp/ParseFTPList.h
+++ b/net/third_party/parseftp/ParseFTPList.h
@@ -1,131 +1,136 @@
-// Version: MPL 1.1/GPL 2.0/LGPL 2.1
-//
-// The contents of this file are subject to the Mozilla Public License Version
-// 1.1 (the "License"); you may not use this file except in compliance with
-// the License. You may obtain a copy of the License at
-// http://www.mozilla.org/MPL/
-// Software distributed under the License is distributed on an "AS IS" basis,
-// WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
-// for the specific language governing rights and limitations under the
-// License.
-//
-// The Original Code is mozilla.org Code.
-//
-// The Initial Developer of the Original Code is
-// Cyrus Patel <cyp@fb14.uni-mainz.de>.
-// Portions created by the Initial Developer are Copyright (C) 2002
-// the Initial Developer. All Rights Reserved.
-//
-// Contributor(s):
-// Doug Turner <dougt@netscape.com>
-//
-// Alternatively, the contents of this file may be used under the terms of
-// either the GNU General Public License Version 2 or later (the "GPL"), or
-// the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
-// in which case the provisions of the GPL or the LGPL are applicable instead
-// of those above. If you wish to allow use of your version of this file only
-// under the terms of either the GPL or the LGPL, and not to allow others to
-// use your version of this file under the terms of the MPL, indicate your
-// decision by deleting the provisions above and replace them with the notice
-// and other provisions required by the GPL or the LGPL. If you do not delete
-// the provisions above, a recipient may use your version of this file under
-// the terms of any one of the MPL, the GPL or the LGPL.
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org Code.
+ *
+ * The Initial Developer of the Original Code is
+ * Cyrus Patel <cyp@fb14.uni-mainz.de>.
+ * Portions created by the Initial Developer are Copyright (C) 2002
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *   Doug Turner <dougt@netscape.com>
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
 
-// Derived from:
-// mozilla/netwerk/streamconv/converters/ParseFTPList.h revision 1.3
+#ifndef NET_THIRD_PARTY_PARSEFTP_PARSEFTPLIST_H_
+#define NET_THIRD_PARTY_PARSEFTP_PARSEFTPLIST_H_
 
+#include "base/time.h"
 
-#ifndef NET_THIRD_PARTY_PARSEFTP_FTP_DIRECTORY_PARSER_H_
-#define NET_THIRD_PARTY_PARSEFTP_FTP_DIRECTORY_PARSER_H_
+/* ParseFTPList() parses lines from an FTP LIST command.
+**
+** Written July 2002 by Cyrus Patel <cyp@fb14.uni-mainz.de>
+** with acknowledgements to squid, lynx, wget and ftpmirror.
+**
+** Arguments:
+**   'line':       line of FTP data connection output. The line is assumed
+**                 to end at the first '\0' or '\n' or '\r\n'. 
+**   'state':      a structure used internally to track state between 
+**                 lines. Needs to be bzero()'d at LIST begin.
+**   'result':     where ParseFTPList will store the results of the parse
+**                 if 'line' is not a comment and is not junk.
+**
+** Returns one of the following:
+**    'd' - LIST line is a directory entry ('result' is valid)
+**    'f' - LIST line is a file's entry ('result' is valid)
+**    'l' - LIST line is a symlink's entry ('result' is valid)
+**    '?' - LIST line is junk. (cwd, non-file/dir/link, etc)
+**    '"' - its not a LIST line (its a "comment")
+**
+** It may be advisable to let the end-user see "comments" (particularly when 
+** the listing results in ONLY such lines) because such a listing may be:
+** - an unknown LIST format (NLST or "custom" format for example)
+** - an error msg (EPERM,ENOENT,ENFILE,EMFILE,ENOTDIR,ENOTBLK,EEXDEV etc).
+** - an empty directory and the 'comment' is a "total 0" line or similar.
+**   (warning: a "total 0" can also mean the total size is unknown).
+**
+** ParseFTPList() supports all known FTP LISTing formats:
+** - '/bin/ls -l' and all variants (including Hellsoft FTP for NetWare); 
+** - EPLF (Easily Parsable List Format); 
+** - Windows NT's default "DOS-dirstyle";
+** - OS/2 basic server format LIST format;  
+** - VMS (MultiNet, UCX, and CMU) LIST format (including multi-line format);
+** - IBM VM/CMS, VM/ESA LIST format (two known variants);  
+** - SuperTCP FTP Server for Win16 LIST format;  
+** - NetManage Chameleon (NEWT) for Win16 LIST format;  
+** - '/bin/dls' (two known variants, plus multi-line) LIST format;
+** If there are others, then I'd like to hear about them (send me a sample).
+**
+** NLSTings are not supported explicitely because they cannot be machine 
+** parsed consistently: NLSTings do not have unique characteristics - even 
+** the assumption that there won't be whitespace on the line does not hold
+** because some nlistings have more than one filename per line and/or
+** may have filenames that have spaces in them. Moreover, distinguishing
+** between an error message and an NLST line would require ParseList() to
+** recognize all the possible strerror() messages in the world.
+*/
 
-#include "base/time.h"
 
-namespace net {
+/* #undef anything you don't want to support */
+#define SUPPORT_LSL  /* /bin/ls -l and dozens of variations therof */
+#define SUPPORT_DLS  /* /bin/dls format (very, Very, VERY rare) */
+#define SUPPORT_EPLF /* Extraordinarily Pathetic List Format */
+#define SUPPORT_DOS  /* WinNT server in 'site dirstyle' dos */
+#define SUPPORT_VMS  /* VMS (all: MultiNet, UCX, CMU-IP) */
+#define SUPPORT_CMS  /* IBM VM/CMS,VM/ESA (z/VM and LISTING forms) */
+#define SUPPORT_OS2  /* IBM TCP/IP for OS/2 - FTP Server */
+#define SUPPORT_W16  /* win16 hosts: SuperTCP or NetManage Chameleon */
 
-struct ListState {
-  void*                magic;          // to determine if previously
-                                       // initialized.
-  int                  now_tm_valid;   // now_tm contains a valid time?
-  base::Time::Exploded now_tm;         // needed for year determination.
-  int                  lstyle;         // LISTing style.
-  int                  parsed_one;     // returned anything yet?
-  char                 carry_buf[84];  // for VMS multiline.
-  unsigned int         carry_buf_len;  // length of name in carry_buf.
-  unsigned int         numlines;       // number of lines seen.
-};
+namespace net {
 
-enum LineType {
-  FTP_TYPE_DIRECTORY,  // LIST line is a directory entry ('result' is valid).
-  FTP_TYPE_FILE,       // LIST line is a file's entry ('result' is valid).
-  FTP_TYPE_SYMLINK,    // LIST line is a symlink's entry ('result' is valid).
-  FTP_TYPE_JUNK,       // LIST line is junk. (cwd, non-file/dir/link, etc).
-  FTP_TYPE_COMMENT     // Its not a LIST line (its a "comment").
+struct list_state
+{
+  void           *magic;        /* to determine if previously initialized */
+  bool           now_tm_valid;  /* true if now_tm is valid */
+  base::Time::Exploded now_tm;  /* needed for year determination */
+  int            lstyle;        /* LISTing style */
+  int            parsed_one;    /* returned anything yet? */
+  char           carry_buf[84]; /* for VMS multiline */
+  unsigned int   carry_buf_len; /* length of name in carry_buf */
+  unsigned int   numlines;      /* number of lines seen */
 };
 
-struct ListResult {
-  LineType             fe_type;
-  const char*          fe_fname;        // pointer to filename
-  unsigned int         fe_fnlen;        // length of filename
-  const char*          fe_lname;        // pointer to symlink name
-  unsigned int         fe_lnlen;        // length of symlink name
-  char                 fe_size[40];     // size of file in bytes
-                                        // (<= (2^128 - 1))
-  base::Time::Exploded fe_time;         // last-modified time
-  int                  fe_cinfs;        // file system is definitely
-                                        // case insensitive
+struct list_result
+{
+  int               fe_type;      /* 'd'(dir) or 'l'(link) or 'f'(file) */
+  const char *      fe_fname;     /* pointer to filename */
+  unsigned int      fe_fnlen;     /* length of filename */
+  const char *      fe_lname;     /* pointer to symlink name */
+  unsigned int      fe_lnlen;     /* length of symlink name */
+  char              fe_size[40];  /* size of file in bytes (<= (2^128 - 1)) */
+  base::Time::Exploded fe_time;   /* last-modified time */
+  int               fe_cinfs;     /* file system is definitely case insensitive */
+                                  /* (converting all-upcase names may be desirable) */
 };
 
-// ParseFTPLine() parses line from an FTP LIST command.
-//
-// Written July 2002 by Cyrus Patel <cyp@fb14.uni-mainz.de>
-// with acknowledgements to squid, lynx, wget and ftpmirror.
-//
-// Arguments:
-// 'line': line of FTP data connection output. The line is assumed
-// to end at the first '\0' or '\n' or '\r\n'.
-// 'state': a structure used internally to track state between
-// lines. Needs to be bzero()'d at LIST begin.
-// 'result': where ParseFTPList will store the results of the parse
-// if 'line' is not a comment and is not junk.
-//
-// Returns one of the following:
-// 'd' - LIST line is a directory entry ('result' is valid)
-// 'f' - LIST line is a file's entry ('result' is valid)
-// 'l' - LIST line is a symlink's entry ('result' is valid)
-// '?' - LIST line is junk. (cwd, non-file/dir/link, etc)
-// '"' - its not a LIST line (its a "comment")
-//
-// It may be advisable to let the end-user see "comments" (particularly when
-// the listing results in ONLY such lines) because such a listing may be:
-// - an unknown LIST format (NLST or "custom" format for example)
-// - an error msg (EPERM,ENOENT,ENFILE,EMFILE,ENOTDIR,ENOTBLK,EEXDEV etc).
-// - an empty directory and the 'comment' is a "total 0" line or similar.
-// (warning: a "total 0" can also mean the total size is unknown).
-//
-// ParseFTPList() supports all known FTP LISTing formats:
-// - '/bin/ls -l' and all variants (including Hellsoft FTP for NetWare);
-// - EPLF (Easily Parsable List Format);
-// - Windows NT's default "DOS-dirstyle";
-// - OS/2 basic server format LIST format;
-// - VMS (MultiNet, UCX, and CMU) LIST format (including multi-line format);
-// - IBM VM/CMS, VM/ESA LIST format (two known variants);
-// - SuperTCP FTP Server for Win16 LIST format;
-// - NetManage Chameleon (NEWT) for Win16 LIST format;
-// - '/bin/dls' (two known variants, plus multi-line) LIST format;
-// If there are others, then I'd like to hear about them (send me a sample).
-//
-// NLSTings are not supported explicitely because they cannot be machine
-// parsed consistently: NLSTings do not have unique characteristics - even
-// the assumption that there won't be whitespace on the line does not hold
-// because some nlistings have more than one filename per line and/or
-// may have filenames that have spaces in them. Moreover, distinguishing
-// between an error message and an NLST line would require ParseList() to
-// recognize all the possible strerror() messages in the world.
-
-LineType ParseFTPLine(const char *line,
-                      struct ListState *state,
-                      struct ListResult *result);
+int ParseFTPList(const char *line, 
+                 struct list_state *state,
+                 struct list_result *result );
 
 }  // namespace net
 
-#endif  // NET_THIRD_PARTY_PARSEFTP_FTP_DIRECTORY_PARSER_H_
+#endif  // NET_THIRD_PARTY_PARSEFTP_PARSEFTPLIST_H_