Re-commit r22981 after backout at r22992

build/mac/dump_app_syms

-#!/bin/sh
+#!/bin/bash
 
 # Copyright (c) 2009 The Chromium Authors. All rights reserved.
 # Use of this source code is governed by a BSD-style license that can be
 # found in the LICENSE file.
 
+# This script expects the following environment variables to be set.  Xcode
+# normally sets them:
+#
+# CONFIGURATION - Release or Debug; this script only operates when Release.
+# SRCROOT - /path/to/chrome/src/chrome
+# BUILT_PRODUTS_DIR - /path/to/chrome/src/xcodebuild/Release
+#
+# The script also takes a single argument defining the branding type.
+#
+# To test this script without running an entire build:
+#
+# cd /path/to/chrome/src/chrome
+# CONFIGURATION=Release \
+#     SRCROOT=$(pwd) \
+#     BUILT_PRODUCTS_DIR=$(pwd)/../xcodebuild/Release \
+#     ../build/mac/dump_app_syms Chromium
+
 # Make sure we got the header to write into passed to us
 if [ $# -ne 1 ]; then
   echo "error: missing branding as an argument" >&2
   exit 1
 fi
 
 set -ex
 
 # Skip out if we're aren't in Release mode, no need for dump_syms on debug runs.
 if [ "${CONFIGURATION}" != "Release" ] ; then
   exit 0
 fi
 
 TOP="${SRCROOT}/.."
 BUILD_BRANDING=$1
 
 BRAND_SCRIPT="${TOP}/build/branding_value.sh"
 SRC_APP_NAME=$("${BRAND_SCRIPT}" "${BUILD_BRANDING}" PRODUCT_FULLNAME)
 . "${TOP}/chrome/VERSION"
 
 BREAKPAD_DUMP_SYMS="${BUILT_PRODUCTS_DIR}/dump_syms"
-BREAKPAD_PRODUCT_ID="${BUILD_BRANDING}_Mac"
 FULL_VERSION="${MAJOR}.${MINOR}.${BUILD}.${PATCH}"
-SRC_APP_PATH="${BUILT_PRODUCTS_DIR}/${SRC_APP_NAME}.app"
-# Created by the build/mac/strip_from_xcode script.
-UNSTRIPPED_APP="${SRC_APP_PATH}.dSYM/Contents/Resources/DWARF/${SRC_APP_NAME}"
-APP_SYMBOL_FILE="${BUILT_PRODUCTS_DIR}/${SRC_APP_NAME}-${FULL_VERSION}-i386.breakpad"
+ARCH="i386"
 
-# Only run dump_syms if the file has changed since we last did a dump.
-if [ "${UNSTRIPPED_APP}" -nt "${APP_SYMBOL_FILE}" ] ; then
-  "${BREAKPAD_DUMP_SYMS}" -a i386 "${UNSTRIPPED_APP}" > "${APP_SYMBOL_FILE}"
+DSYM_TAR_PATH="${BUILT_PRODUCTS_DIR}/${SRC_APP_NAME}.dSYM.tar.bz2"
+
+declare -a DSYMS
+
+for SRC_BUNDLE in "${SRC_APP_NAME}.app" \
+                  "${SRC_APP_NAME} Framework.framework" \
+                  "${SRC_APP_NAME} Helper.app" ; do
+  SRC_STEM=$(echo "${SRC_BUNDLE}" | sed -Ee 's/^(.*)\..*$/\1/')
+  SRC_BUNDLE_PATH="${BUILT_PRODUCTS_DIR}/${SRC_BUNDLE}"
+  DSYM_NAME="${SRC_BUNDLE}.dSYM"
+  DSYM_PATH="${BUILT_PRODUCTS_DIR}/${DSYM_NAME}"
+  DWARF_PATH="${DSYM_PATH}/Contents/Resources/DWARF/${SRC_STEM}"
+  BPAD_SYM_NAME="${SRC_STEM}-${FULL_VERSION}-${ARCH}.breakpad"
+  BPAD_SYM_PATH="${BUILT_PRODUCTS_DIR}/${BPAD_SYM_NAME}"
+
+  # Only run dump_syms if the file has changed since the last dump.
+  if [ "${DWARF_PATH}" -nt "${BPAD_SYM_PATH}" ] ; then
+    "${BREAKPAD_DUMP_SYMS}" -a "${ARCH}" "${DWARF_PATH}" > "${BPAD_SYM_PATH}"
+  fi
+
+  # Remove the .dSYM archive if the file has changed since the archive was
+  # last generated.  This will cause a new .dSYM archive to be created.
+  if [ "${DWARF_PATH}" -nt "${DSYM_TAR_PATH}" ] ; then
+    rm -f "${DSYM_TAR_PATH}"
+  fi
+
+  # Push the .dSYM bundle onto the DSYMS array so that it will be included in
+  # the .dSYM archive if a new one is needed
+  DSYMS[${#DSYMS[@]}]="${DSYM_NAME}"
+done
+
+# Create the archive of .dSYM bundles.
+if [ ! -e "${DSYM_TAR_PATH}" ] ; then
+  # Change directory so that absolute paths aren't included in the archive.
+  (cd "${BUILT_PRODUCTS_DIR}" &&
+   tar --owner 0 --group 0 -jcf "${DSYM_TAR_PATH}" "${DSYMS[@]}")
 fi
-APP_DSYM_NAME="${SRC_APP_NAME}.app.dSYM"
-
-# Do the same thing for chrome_dll.
-
-SRC_DYLIB_NAME="${SRC_APP_NAME} Framework"
-SRC_DYLIB_PATH="${BUILT_PRODUCTS_DIR}/${SRC_DYLIB_NAME}.framework"
-UNSTRIPPED_DYLIB="${SRC_DYLIB_PATH}.dSYM/Contents/Resources/DWARF/${SRC_DYLIB_NAME}"
-DYLIB_SYMBOL_FILE="${BUILT_PRODUCTS_DIR}/${SRC_DYLIB_NAME}-${FULL_VERSION}-i386.breakpad"
-if [ "${UNSTRIPPED_DYLIB}" -nt "${DYLIB_SYMBOL_FILE}" ] ; then
-  "${BREAKPAD_DUMP_SYMS}" -a i386 "${UNSTRIPPED_DYLIB}" > "${DYLIB_SYMBOL_FILE}"
-fi
-DYLIB_DSYM_NAME="${SRC_DYLIB_NAME}.framework.dSYM"
-
-DSYM_TAR_PATH="${BUILT_PRODUCTS_DIR}/${APP_DSYM_NAME}.tar.bz2"
-
-# Make a .tar.bz2 out of the .dSYM
-if [ "${BUILT_PRODUCTS_DIR}/${APP_DSYM_NAME}" -nt "${DSYM_TAR_PATH}" ] ||
-   [ "${BUILT_PRODUCTS_DIR}/${DYLIB_DSYM_NAME}" -nt "${DSYM_TAR_PATH}" ] ; then
-  # Change directory so when building the tar, we don't include the build dir
-  # in the tar paths.
-  (cd "${BUILT_PRODUCTS_DIR}" &&
-   tar -jcf "${DSYM_TAR_PATH}" "${APP_DSYM_NAME}" "${DYLIB_DSYM_NAME}")
-fi